Samsung SL-M2875FW, SLM2875FW manual Wired network setup, IPv4 configuration using SetIP Windows

Wired network setup

4

Printing a network configuration report

You can print Network Configuration Report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network.

• Accessing menus may differ from model to model (see "Accessing the menu" on page 30).

•It may be necessary to press OK to navigate to lower-level menus for some models.

•The machine has the display screen: Press the (Menu) button on the control panel and select Network > Network Conf.

Using this Network Configuration Report, you can find your machine’s MAC address and IP address.

For example:

•MAC Address: 00:15:99:41:A2:78

•IP Address: 169.254.192.192

Setting IP address

• This feature is not available for the machine that does not support the network interface (see "Rear view" on page 20).

• TCP/IPv6 is not supported by this program.

First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network.

IPv4 configuration using SetIP (Windows)

Before using the SetIP program, disable the computer firewall from Control Panel > Security Center > Windows Firewall.

1Download the software from the Samsung website then unpack and install it: (http://www.samsung.com > find your product > Support or

Download).

2Follow the instructions in the installation window.

2. Using a Network-Connected Machine 10