Samsung SLM2875FW, SL-M2875FW, SLM2875FD manual Receiving setup, Duplex Printa

Fax menu

5

Receiving setup

Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 30).

To change the menu options:

•Press (fax) > (Menu) > Fax Setup > Receiving on the control panel.

Item	Description
Receive Mode	Selects the default fax receiving mode.
Ring to Answer	Specifies the number of times the machine rings before
	answering an incoming call.
	Automatically prints the page number, and the date
Stamp Rcv Name	and time of reception at the bottom of each page of a
	received fax.
	Initiates fax reception from an extension phone
	plugged into the EXT socket on the back of the
Rcv Start Code	machine. If you pick up the extension phone and hear
	fax tones, enter the code. It is preset to *9* at the
	factory.

Item	Description
Auto Reduction	Automatically reduces an incoming fax page to fit the
	size of the paper loaded in the machine.
Discard Size	Discards a specific length from the end of the received
	fax.
	Blocks any unwanted faxes that you stored in the
Junk Fax Setup	memory as junk fax numbers. This setting may not be
	available depending on your country.
	Enables a user to use a single telephone line to answer
	several different telephone numbers. You can set the
DRPD Mode	machine to recognize different ring patterns for each
	number. This setting may not be available depending
	on your country (see "Receiving faxes using DRPD
	mode" on page 115).
Duplex Printa	Prints the received fax data on both sides of the paper.
	You can save the paper usage.
Change Default	Resets the value or setting to the printer’s out-of-box
	state.
	Setting this option to ON provides the ability to send or
	receive a fax while the line is busy. You can select to
Manual TX/RX	send or receive a fax by either picking up the extension
	phone receiver and pressing the Start button or by
	pressing the (On Hook Dial) button and pressing
	the Start button.
a. M287xFD/M287xFW/M287xHN only.

3. Useful Setting Menus 72