Samsung SLM2875FD Printing quality problems, Condition Suggested solutions Light or faded print

Printing quality problems

If the inside of the machine is dirty or paper has been loaded improperly, there might be a reduction in print quality. See the table below to clear the problem.

Condition	Suggested solutions
Light or faded print	• If a vertical white streak or faded area appears on the page, the toner supply is low. Install a new toner cartridge (see "Replacing the
	toner cartridge" on page 76).
	• The paper may not meet paper specifications; for example, the paper may be too moist or rough.
	• If the entire page is light, the print resolution setting is too low or the toner save mode is on. Adjust the print resolution and turn
	the toner save mode off. See the help screen of the printer driver.
	• A combination of faded or smeared defects may indicate that the toner cartridge needs cleaning. Clean the inside of your machine
	(see "Cleaning the machine" on page 83).
	• The surface of the LSU part inside the machine may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page
	83). If these steps do not correct the problem, contact a service representative.
The top half of the paper is	The toner might not adhere properly to this type of paper.
printed lighter than the rest of	• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set the paper type to Recycled (see
the paper
	"Opening printing preferences" on page 53).

6. Troubleshooting 149