Samsung SL-M2875FW, SLM2875FW manual Canceling the connection process, Disconnecting from a network

Wireless network setup

In the following cases, the machine automatically re-connects to the wireless network:

•The machine is turned off and on again.

•The access point (or wireless router) is turned off and on again.

15

Using the menu button

Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Features by models" on page 6).

Canceling the connection process

To cancel the wireless network connection when the machine is connecting to

the wireless network, press and release the (Stop/Clear) on the control panel. You need to wait 2 minutes to re-connect to the wireless network.

Disconnecting from a network

To disconnect the wireless network connection, press the (WPS) button on the control panel for more than two seconds.

•When the Wi-Fi network is in idle mode: The machine is immediately disconnected from the wireless network and the WPS LED turns off.

•When the Wi-Fi network is being used: While the machine waits until the current job is finished, the light blinks fast on the WPS LED. Then, the wireless network connection is automatically disconnected and the WPS LED turns off.

Before starting, you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network.

After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 13).

2. Using a Network-Connected Machine 31