JVC CA-EXA1, SP-EXA1 Playing discs, Playback, 1 Press FAUDIO, 3 Press 3(play), 2 Press 0OPEN/CLOSE to open the disc tray to load a disc

Playing discs

Playback

(Refer to page 17 for playing MP3 and JPEG.)

A page 6	Place a disc with the label side
	facing up.
	• Place an 8 cm disc in to the
	hollow part in the center.

1 Press FAUDIO.

• The power will be turned on and the STANDBY lamp will go off.

• Press FAUDIO again to turn off the power.

2 Press 0OPEN/CLOSE to open the disc tray to load a disc.

3 Press 3(play).

The disc tray will close and playback will start.

•The power will be turned on when any of ,

, or on the main unit and ,

,	or	on the remote control is
pressed while the power is off.
If any button other than			or	is

pressed, the source will also be changed (if there is a disc loaded, playback will start).

NOTE

•A menu screen may be displayed after starting playback of a DVD. In this case, select a desired item to playback by using the following buttons on the remote control.

•Select a desired item using and

press .

•Select a desired item using the number buttons.

•Depending on the disc, actual operation may be different from the description.

	Screens displayed on the TV when the power is turned ON.
	The following messages appear depending on the status of the system.
	(When FM/AM or AUX is selected as a source, the messages do not appear.)
NOW READING		Appears when the system is reading the disc information. Wait for a while.
REGION CODE		Appears when the Region Code of the DVD does not match the code the
ERROR!		system supports. (A page 3)
NO DISC		Appears when no disc is loaded.
OPEN		Appears when opening the disc tray.
CLOSE		Appears when closing the disc tray.

13