JVC CA-EXA1, SP-EXA1 Using AV COMPU LINK, Connection and setting, Operations, Reference, Connection with a TV set, Connection with a TV set and a VCR

Using AV COMPU LINK

Reference

When the TV set or device to be connected is a JVC product equipped with the AV COMPU LINK-

Connection with a TV set and an AV amplifier

IIor -IIIjack, connecting them to the AV COMPU LINK jack on the system will allow you to control the other devices by operating one device.

Connection and setting

NOTE

•Refer to “Others” (A page 31) to set the AV COMPU LINK mode.

•Also carefully read manuals of devices to be connected.

AV COMPU

LINK-IIor -III

JVC

JVC-made

TV set

Connection cord (sold separately)

COMPU LINK

•Also read manuals of the AV amplifier.

Main unit

AV amplifier

Connection cord (sold separately)

Connection with a TV set

AV COMPU

LINK-IIor -III

JVC

JVC-made		Main unit
JVC-made
TV set	Connection cord
	Connection cord
	(sold separately)
	TV input jack	Setting of AV COMPU LINK mode
	Video 3	DVD 1

•Connect to the Video 3 (DVD) input jack on your TV set. If Video 3 is for DV/Movie input, read the following descriptions:

Connection with a TV set and a VCR

AV COMPU

LINK-IIor -III

JVC

JVC-made	Main unit
JVC-made
TV set	Connection cord
	Connection cord
	(sold separately)
	Connection cord
	(sold separately)
	AV COMPU
	LINK-II
	JVC-made VCR

TV input jack	AV COMPU LINK mode	Remote-control code of VCR
Video 1	DVD 2	B

Video 2	DVD 3	A

•When using with initial settings, connect to Video 3 (if not set to DV/Movie input). Set the remote- control code to “A”.

Input jack of AV amplifier	AV COMPU LINK mode

DVD	DVD 1

NOTE

•Connecting DVD sound output to a sound input jack for any device other than a DVD disables proper operation.

•When connecting component video output to a TV set, change setting of the AV COMPU LINK mode in this system to “DVD 1”. Do not connect to the S- video jack on the AV amplifier.

Operations

1 Turn on the main power of the TV set.

2 Insert a disc or videotape into the source device (the system or a VCR).

3 Press the play button on the source device.

•The TV set will be turned on.

•TV input will be switched to external input (Video 1, 2 or 3) of the source device.

•The AV amplifier will be turned on.

•The source of the AV amplifier will be switched to the device on which the play button has been pressed.