Listening to a radio broadcast
NOTE
Set the remote control mode selector to AUDIO before using the number buttons.
Selecting a station
1 Press FM/AM.
Each time you press the button, FM and AM change alternately.
2 Press 4/x to select the station (frequency).
Automatic tuning:
Hold down 4/x until the system starts searching, and then release the button. (The AUTO indicator lights while searching.) When a station of sufficient signal strength is tuned in to, the system stops searching automatically.
To stop searching manually, press 4/x.
Manual tuning:
Each time you press 4/x, the frequency changes.
•When an FM stereo program is received, the ST (Stereo) indicator lights.
NOTE
If the stereo FM program currently tuned in to is noisy, you can improve the reception by pressing FM MODE to switch to the monaural mode. If you press FM MODE again, or tune in to another station, the receiving mode returns automatically to the stereo mode.
Presetting stations
Presetting stations in the system allows you to easily tune in to a station.
The system stores up to 30 FM stations and up to 15 AM stations.
1 Select a station you want to store (page 31 for how to select).
2 Press MEMORY.
“MEMORY” is flashing on the display window for a while.
3 Select the number you want to store by pressing number buttons while “MEMORY” is flashing.
•Refer to “How to use the number buttons” (page 15).
•You can also select by pressing 1/y.
4 Press MEMORY while the selected number is flashing.
“STORED” appears on the display window and the selected station is stored.
NOTE
•Storing a new station to a used number erases the previously stored station.
•After storing new stations, do not unplug the AC power cord to turn off the system. If you do so, the new preset stations will be cleared.
Tuning in to a preset station
1 Press FM/AM to select either FM or AM.
2 Press the number buttons to select the memory number of a station you want to tune in to.
•Refer to “How to use the number buttons” (page 15).
•You can also select by pressing 1/y.
31