Preparation
7Attaching the base plate
To prevent the speaker from falling over, be sure to attach the supplied base plate to each speaker.
•Take care not to drop the base plate or speaker while assembling; otherwise, it may cause damage to the floor or injury.
•Ensure enough space for assembly and installation.
•Place a large, thick cloth on the floor where you assemble the speaker, so you can protect the floor and the speaker itself.
•Do not touch the speaker units.
Turn the speaker upside down and attach the base plate securely on the bottom of the speaker with the supplied screws as illustrated.
•Prepare a Phillips screw driver.
•Make sure that the FRONT arrow on the top of the base plate points the front side of the speaker.
7To remove the speaker grille
To remove the speaker grille, insert your fingers at the bottom of the speaker grille, then pull upward.
Base plate
Speaker (Front side)
Screw M4 x 20 mm (supplied)
To attach the speaker grille, put the projections of the speaker into the holes of the speaker grille.
• Do not press the speaker grille strongly.
Speaker units