Continued

Turning On the Power

To turn on the unit, press STANDBY/ON

STANDBY/ON

(or

on the unit).

 

The STANDBY/ON lamp on the unit lights green.

•When you press the source button—3/8CD, FM/AM and AUX (or AUX/DVD on the unit), the unit automatically turns on and starts playback if the source is ready.

•Pressing one of the disc eject buttons (CD10 – CD50) also turns on the unit. (See page 15.)

•Pressing one of the disc number buttons (CD 1 – CD 5) on the remote control also turns on the unit and starts playback if discs are on the corresponding disc trays. (See page 16.)

To turn off the unit (standby), press STANDBY/ON (or on the unit) again.

The STANDBY/ON lamp on the unit lights red.

•“AM 12:00” flashes on the display until you set the built-in clock. After setting the clock, the clock time will appear on the display while the unit is in standby mode.

•A little power is always consumed even while the unit is in standby mode.

To switch off the power supply completely, unplug the AC

power cord from the AC outlet.

When you unplug the AC power cord or if a power failure occurs

The clock is reset to “AM 12:00” right away, while the tuner preset stations will be erased in a few days.

To turn off the unit automatically (Auto Standby)

Using the Auto Standby function, the unit automatically turns itself off if no sound comes in for more than 3 minutes when “CD” is selected as the source.

If an operation is done within this 3-minute period, the Auto Standby function is canceled temporarily even though no sound comes in.

•You can also turn off the unit automatically by using the Sleep Timer. (See page 22.)

On the remote control ONLY:

To activate the Auto Standby function,

A.STANDBY

 

press A.STANDBY.

The AUTO STANDBY indicator lights up on the display.

•When no sound comes in, the AUTO STANDBY indicator starts flashing on the display. About 5 seconds before the unit turns itself off, “AUTO STANDBY” starts flashing on the display.

AUTO STANDBY indicator

AUTO

STANDBY

To deactivate the Auto Standby function, press

A.STANDBY.

The AUTO STANDBY indicator goes off.

10