Connections [ Donotconnectthe powercorduntilallother connectionshavebeenmade. ]
•Assemblingthespeakers-- TH-C60_TH-CSO
• For TH-C60: Assemble front speakers and surround speakers.
• For TH-C50: Assemble front speakers.
For the surround speakers ofTH-C50, see "Connecting the
surround speakers -- TH-C50". (See page 10.)
ForTH-C60
Front speaker Surround
(SP-THC6OF)(2) speaker
(SP-THC60S)(2)

B

Stand (4) Baseplate (4)
•Check file model name of each speaker from the label on the
rear to locate eacll speaker correctly.
For TH-CSO
Stand (2)Front speaker Baseplate (2)
(SP-THC6OF)(2)
Assembled speakers
or
With stand: Referto steps 1to Without stand: Refer to steps
3. 2and 3.
Before assembling --
•Prepare a Phillips screwdriver (not supplied).
• Take care not to drop any component part while assembling;
otherwise, itmay cause damage to the floor or injur_,c
'_"g'peaker
_ Stand
I _,,, (2) Screw MSx 40 mm/M5 x1-5/8

I \42 ch°s/supp'°dl

2stand:
@: Use these screws(M4 x
45 mm/M4 x 1-13/16 inches)
when assembling the speaker
the base plate.
Base plate
Stand (or speaker
directly) _ Screw M4 x 20 mm/M4
x13/16 inches
(supplied) _
When assembling the speaker with the base plate, use the
screws @.
f
Red White
You can route the speaker cord
by using speaker cord clamp
(supplied).