29
SR-9090U
REC
REC STOP REC
CHECK EJECT OPERATE
REVERSE
FIELD REV FIELD ADV
REW PLAY
TRACKING TIMERSEARCH
RESET/
CANCEL
DISPLAY LOCK
HDR
CNT RESET MENU TIME MODE
SHIFT
ON SCREEN
OPERATE
V. LOCK
PAUSE FF
–+–+
SET
–+
6 RECORDING
[REC] indicator
[ON SCREEN f] button
[TIME MODE +/–] buttons

6-1 Switch Setting During Recording

Connection
Connect the input and output connectors on the rear panel
correctly. Refer to “CONNECTIONS” on pages 14 to 16.
Menu switch settings
Set menu switches as required.
5INPUT
• Select LINE (composite) or Y/C video signal input.
5ON SCREEN/F. DISPLAY MODE
• Select the brightness and ON/OFF for each indication
(date, time and recording speed, etc).
During recording, the selected on-screen data is
recorded together with video signals.
If you do not want to display or record a specific item,
set it to “OFF”.
• <REC TALLY> setting
Set whether or not the [REC] indicator lights in the
Record mode.
5VTR MODE
• HDR
Set to “ON” to record in the High-Density Recording
mode during timelapse recording.
• POWER ON REC
Set to “ON” for external timer recording or automatic
restart of recording after a power failure. For details,
refer to “6-9 How to Restore Recording After Power
Failure” and “6-10 External Timer Recording” on page
45.
• AUTO REW
Select the mode engaged when the tape ends.
“OFF”: The Stop mode is engaged.
“ON”: The tape automatically rewinds to the
beginning.
When the <REPEAT REC> menu switch is set to “ON”,
repeat recording takes place regardless of the setting
of this switch.
• REPEAT REC
Set to “ON” to perform repeat recording. For details,
refer to “6-7 Repeat Recording” on page 43.
• AUTO REC CHECK
Set to “ON” to perform Recording Check automatically
at the beginning of a tape in the Repeat Recording
mode.
5SRI/EXT MODE
• SRI/EXT REC
- Set to “SERIES” to perform series recording. For
details, refer to “6-6 Series Recording” on page 41.
- Set to “EXT” to execute automatic recording when
activated by an external signal.
For details, refer to “6-8 Recording with External
VCR Activation Signal” on page 44.
5ALARM/SENSOR MODE
• REC MODE
- For alarm recording, set to “ALARM” or “ALL”. For
details, refer to 6-4 Alarm Recording” on page 38.
- For sensor recording, set to “SENSOR” or “ALL”. For
details, refer to 6-5 Sensor Recording” on page 40.
5BUZZER
• TAPE END
Set to “ON” if you want the buzzer to sound when the
tape ends during recording.
5IN/OUT
• CAMERA SW
Set the camera switching timing signal output to an
external sequential switcher during recording.
- To switch cameras every 1 field or 1 frame, set this
menu switch to “1 FIELD” or “2 FIELD”.
Recording tape
Use an HG (high grade) tape for recording with this unit
(a JVC cassette is recommended). Before recording,
perform a test recording to check the picture quality.
Tapes recorded on this VCR cannot be played back on
normal VHS VCRs. To avoid inadvertently trying to
play back tapes recorded in this unit on standard VHS
VCRs, label the cassette appropriately to distinguish it
from tapes recorded in the normal VHS mode.
[ON SCREEN 7] button