JVC SR- DVM600U Time Code, Skip Search, Slow Motion, Instant Replay, Next Function Memory, Soundtrack Selection, Variable Speed Search, Still Picture/Frame-By-FramePlayback

34 EN BASIC OPERATIONS ON DV DECK

	Playback Features	Skip Search
		During playback, press v.
		● Each press initiates an approximately 30-second period of fast-
● Turn on the unit.		motion playback. Normal playback resumes automatically.
● Turn on the TV and select the AV mode.		Instant Replay
● Slide the TV/DVD switch to DVD.
● Press DV/HDD/DVD on the unit repeatedly or DV on the		During playback, press w on the remote control or
	remote so that the DV lamp lights up on the unit.
		INSTANT REPLAY on the unit. The unit rewinds the picture a little
		(about 7 seconds) and resumes playback.

TVDVD

DV

I

O N

W

DISPLAY

AUDIO

ATTENTION:

In the search, still, slow-motion or frame-by-frame playback mode, a slight mosaic effect appears on screen.

Next Function Memory

The Next Function Memory AtellsB the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode.

For Automatic Start Of PlaybackPress O, then press I within 2 seconds.For Automatic Cassette Ejection After Tape RewindPress O, then press M (DV) within 2 seconds.Soundtrack Selection

Your unit is capable of recording two soundtracks (L and R) and will play back the one you select.

During PlaybackPressing AUDIO changes the soundtrack as follows:

TRACK	USE
On-Screen Display
L W X R	Both sounds on the left channel and
	the right channel are mixed and played
	back
L W	Sound on the left channel is played
	back
X R	Sound on the right channel is played
	back

To select the audio mode (SOUND1/SOUND2/MIX), refer to AAUDIO MODEB under ADV SET UPB (A pg. 60).

Variable Speed Search

During playback, press N for forward variable speed search, or O for reverse variable speed search.

●Each press of the button increases the search speed for each direction.

●To resume normal playback, press I.

	Reverse O							NForward
Reverse Search					Reverse	Slow Motion	Normal	Forward Search
		3 steps			Slow Motion	1 step	Play		3 steps
					1 step
–12			–4	–2	–1/5	1/5	1	2		4	12

Still Picture/Frame-By-Frame Playback

1Press W to pause during playback.

2Press W to activate frame-by-frame playback.

●To resume normal playback, press I.

Slow Motion

1Press W to pause during playback.

2Press and hold W for 2 seconds, then release. Press W and release again to return to still picture.

●Press N for forward slow motion or O for reverse slow motion.

●To resume normal playback, press I.

Time Code

During recording, a time code is recorded on the tape. This time code is used to confirm the position on the tape when playing back or editing a tape.

1Press DISPLAY on the remote control or the unit until the time code on the tape appears on the front display panel and the TV screen.

●Each time you press DISPLAY, the indication changes as follows:Time code N Tape remaining time N Clock time N (Back to the beginning)