JVC SR-L910UA 2-1 Front Panel

9

2-1 Front Panel

7Display section

For details, refer to page 10.

8[COUNT/CLOCK] button

Press this button to select the time display or tape

counter in the display.

When the power is turned off, the time is displayed.

9[TIME MODE] button

Use to select the recording or playback time mode.

Each time this button is pressed, the recording/playback

time mode changes in the following sequence.

2H (VHS SP mode) [ 6H(VHS EP mode) [ L12(12-

hour Timelapse mode)[ L24 (24-hour Timelapse

mode) [ 2H (VHS SP mode) ....

The selected recording/playback time mode is shown on

the display.

*The playback time mode cannot be changed when

playing back tapes recorded in the 6H(EP) mode.

0[TIMER REC] button

Press this button to execute the timer recording. For

details, refer to "Timer Recording" on page 28.

![MENU] button

Press this button to display the date, time setting, timer

program setting, various function menu setting and hour

meter. Press again to cancel the display.

@[SHIFT/TRACKING +, -] buttons

• Press to select an item in date/time setting, timer

program setting and function menu setting.

• Press to adjust tracking and reduce noise if there are

tracking problems in the play back mode.

• Tracking adustment is not possible in the L12H and

L24H Timelapse Play mode.

2 CONTROLS AND CONNECTORS

#[SET/V. LOCK +, -] buttons

• Press to set values in date/time setting, timer program

setting and function menu setting.

• Press to reduce the vertical shifting of the picture in

the Still mode.

$[RESET/CANCEL] button

• Normally press this button to reset the tape counter to

0000.

• When the buzzer sounds, press this button to stop the

buzzer sound.

• In the Timer Program Setting mode, press this button

to cancel the program settings. For details, refer to

"Timer Recording" on page 31.

%[AL/PL RESET] alarm/power loss reset button

Press this button to stop alarm recording or reset the

alarm input or power loss data. For details, refer to

page 34.

^[OPE. LOCK] button

Press to activate the operation lock function.

Contents

Main INSTRUCTIONS SR-L910UA VIDEO CASSETTE RECORDER R SL96150 SAFETY PRECAUTIONS CAUTION ATTENTION INFORMATION CAUTION NOTE: Page CONTENTS 1 INTRODUCTION 2 CONTROLS AND CONNECTORS 3 CONNECTIONS 4 MONITOR ON-SCREEN DISPLAY 1 INTRODUCTION 1-2 Periodical Maintenance 1-3 Precautions 5 Handling and storage place 5 5 5 2 CONTROLS AND CONNECTORS 2-1 Front Panel 6816 4 3 2-1 Front Panel 7 8 9 0 2-2 Display 1 6 8 911 12 13 2 3 45 7 10 14 6 2-1 FRONT PANEL 2-3 Rear Panel 1 2 3 4 ! @ # $ % 3 CONNECTIONS 1 2 3 4 5 3-2 Connecting a System Using a Sequential Switcher 3 CONNECTIONS 1 2 the SR-L910UA. 3 4 5 3-3 Connecting the Rear Panel Input/Output Terminal Connections COM CAM SW OUT External interface example 5 4 MONITOR ON-SCREEN DISPLAY 4-1 On-Screen Display in the Time/Date and Record Modes 5 1 2 4-2 Main Menu Display 4 MONITOR ON-SCREEN DISPLAY 5 1 2 4-3 Alarm Input/Power Loss Data Display 1 2 3 4 5 5 SETTING OF THE FUNCTION MENU SWITCHES 5-1 Function Menu Switch Setting 5 1 2 3 [ Three function menu switch setting screens are available. [ ]: Factory setting [ ]: Factory setting [ ]: Factory setting 6 PREPARATION 6-2 Date and Time Setting 6-1 Cassette Loading/Unloading Loading Auto power on 6 PREPARATION Set the date and time using the CLOCK ADJUST menu screen. Set the date and time on the front panel display 1 2 3 4 6-4 Selection of Record/Play Mode 6-3 Summer Time Compensation Standard time 1 2 1 7 RECORDING 7-1 Preparation 5 7-2 Recording Recording Check 5 [ 1 [ 2 1 2 [ 3 [ n [ n 4. 5 16.30.00 6. 7 8 4 5 7-3 Timer Recording 2, 3 16.30.00 6 4, 5 Canceling timer programming 1 2 1 2 3 Notes on timer recording Changing a preset timer program 1 2 3 [ 4 AL 7-4 Alarm Recording 5 7-4 Alarm Recording Connect an alarm sensor to the rear panels alarm input terminal. 2 3 [ 7-5 Sensor Recording 2 3 [ 4 7-6 Repeat Recording 7-7 Series Recording Connections Operations 1 2 7-8 Recording with External VCR Activation Signal Connection Operation 1 2 7-9 How to Restore Recording After Power Failure 7-10 External Timer Recording 7-11 Tape End Buzzer 1 2 8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK 8-1 Preparation Connection Function menu switch settings 5 8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK 8-3 Special-Effects Playback Reverse playback 1 2 8-4 Index Search 5 When the picture moves up and down in the Still mode 8-5 Tracking/V. Lock Adjustment 8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK 9 TROUBLESHOOTING 9-1 Error Indication 5 5 5 9-2 No Error Indication 9 TROUBLESHOOTING 10. OPTIONAL SA-K97U RS-232C INTERFACE BOARD 10-1. Installation of the SA-K97U 3. yourself on sharp edges and metal parts inside the VCR. Note: 10-2. SA-K97U Specifications 9-pin connector specifications Data format 5 5 5 5 5 10-3. SA-K97U RS-232C Protocol & Commands RS-232C protocol JVC table-1 JVC base table 10-3. SA-K97U RS-232C Protocol & Commands This section provides technical data for programmers. 30H 0AH Command description TXD B0H 33H 40H RXD 0AH 0AH 0AH 01H (or 05H) Search start Time 2-2 VCR setting commands TXD 7EH 30H 33H RXD 0AH 0AH 0AH Time 40H 0AH TXD 8EH RXD 0AH Time 30H 0AH 39H 0AH 33H 0AH 30H 0AH 39H 0AH 38H 0AH TXD 8FH RXD 0AH Time 31H 0AH 35H 0AH 32H 0AH 39H 0AH 35H 0AH 39H 0AH 2-3 Commands for VCR status verification * 2-4 Others (Input data correction/Error cancellation) TXD 7EH 30H 32H RXD 0AH 0AH 0AH Time 41H 0AH 33H 0AH 40H 0AH 3 Commands reference chart 11-1 Rear Panels Input/Output 11 APPENDIXES 11 APPENDIXES 11-2 Specifications [Time/date] [Alarm] [Video System] [Audio system]