JVC SR-L910UA 7-6 Repeat Recording

36

VTR MODE 1

(SHARPNESS) NORMAL

(AUTO REC) OFF

(REC CHECK) AUTO

(TAPE END MODE) REPEAT

(INDEX SEARCH) OFF

(CAMERA SW) OFF

(TAPE END BUZZER) OFF

(WARNING BUZZER) OFF

PRESS (SHIFT, SET)

PRESS (MENU) TO END

7-6 Repeat Recording

When the tape reaches the end during recording, it is automatically rewound and recording starts again from the beginning.

5To execute repeat recording, set <TAPE END MODE>

on the VTR mode 1 setting screen to REPEAT.

5Setting the function menu switch <TAPE END MODE>

on the alarm/sensor recording mode setting screen

• When the tape ends during recording in the case when

alarm or sensor recording is executed even once, the

tape stops or rewinds and stops at the beginning if this

menu switch set to “STOP” or “REW”,.

If this menu switch is set to "EJECT", the tape is

ejected.

To continue repeat recording even when alarm/

sensor recording is executed, set this menu

switch to “REPEAT” . * When repeat recording is performed, the previously-

recorded alarm recording is erased.

Auto Recording Check function

This function automatically checks recording quality at

the beginning of the tape during repeat recording.

• To activate the Auto Recording Check function, set the

<REC CHECK> function menu switch in the VTR mode 1

setting screen to AUTO.

Operation of the Auto Recording Check function

• The recorded section at the beginning of the tape is

automatically played back in the Repeat Record mode

and the FM level recorded on the tape is checked. If

the level is satisfactory, recording continues.

• If recording quality is deemed inferior, the heads are

cleaned automatically. After several seconds, recording

is checked again.

If recording quality is still unsatisfactory after two

consecutive checks, the error indicator E-09 is shown

in the display and recording continues.

Function menu switch <REC CHECK> set to AUTO

Normal

Defective

Recording

Recording

Recording

Repeat recording

7 RECORDING

Defective

Beginning of

the tape

Auto head

cleaning

Auto recording

for several

seconds

Recording

check

Recording

check

Auto head

cleaning

Error indicator E-09 display

Display

Normal

Auto recording

check function

Tape end mode Set to

REPEAT

VTR mode 1 setting screen

Contents

Main INSTRUCTIONS SR-L910UA VIDEO CASSETTE RECORDER R SL96150 SAFETY PRECAUTIONS CAUTION ATTENTION INFORMATION CAUTION NOTE: Page CONTENTS 1 INTRODUCTION 2 CONTROLS AND CONNECTORS 3 CONNECTIONS 4 MONITOR ON-SCREEN DISPLAY 1 INTRODUCTION 1-2 Periodical Maintenance 1-3 Precautions 5 Handling and storage place 5 5 5 2 CONTROLS AND CONNECTORS 2-1 Front Panel 6816 4 3 2-1 Front Panel 7 8 9 0 2-2 Display 1 6 8 911 12 13 2 3 45 7 10 14 6 2-1 FRONT PANEL 2-3 Rear Panel 1 2 3 4 ! @ # $ % 3 CONNECTIONS 1 2 3 4 5 3-2 Connecting a System Using a Sequential Switcher 3 CONNECTIONS 1 2 the SR-L910UA. 3 4 5 3-3 Connecting the Rear Panel Input/Output Terminal Connections COM CAM SW OUT External interface example 5 4 MONITOR ON-SCREEN DISPLAY 4-1 On-Screen Display in the Time/Date and Record Modes 5 1 2 4-2 Main Menu Display 4 MONITOR ON-SCREEN DISPLAY 5 1 2 4-3 Alarm Input/Power Loss Data Display 1 2 3 4 5 5 SETTING OF THE FUNCTION MENU SWITCHES 5-1 Function Menu Switch Setting 5 1 2 3 [ Three function menu switch setting screens are available. [ ]: Factory setting [ ]: Factory setting [ ]: Factory setting 6 PREPARATION 6-2 Date and Time Setting 6-1 Cassette Loading/Unloading Loading Auto power on 6 PREPARATION Set the date and time using the CLOCK ADJUST menu screen. Set the date and time on the front panel display 1 2 3 4 6-4 Selection of Record/Play Mode 6-3 Summer Time Compensation Standard time 1 2 1 7 RECORDING 7-1 Preparation 5 7-2 Recording Recording Check 5 [ 1 [ 2 1 2 [ 3 [ n [ n 4. 5 16.30.00 6. 7 8 4 5 7-3 Timer Recording 2, 3 16.30.00 6 4, 5 Canceling timer programming 1 2 1 2 3 Notes on timer recording Changing a preset timer program 1 2 3 [ 4 AL 7-4 Alarm Recording 5 7-4 Alarm Recording Connect an alarm sensor to the rear panels alarm input terminal. 2 3 [ 7-5 Sensor Recording 2 3 [ 4 7-6 Repeat Recording 7-7 Series Recording Connections Operations 1 2 7-8 Recording with External VCR Activation Signal Connection Operation 1 2 7-9 How to Restore Recording After Power Failure 7-10 External Timer Recording 7-11 Tape End Buzzer 1 2 8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK 8-1 Preparation Connection Function menu switch settings 5 8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK 8-3 Special-Effects Playback Reverse playback 1 2 8-4 Index Search 5 When the picture moves up and down in the Still mode 8-5 Tracking/V. Lock Adjustment 8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK 9 TROUBLESHOOTING 9-1 Error Indication 5 5 5 9-2 No Error Indication 9 TROUBLESHOOTING 10. OPTIONAL SA-K97U RS-232C INTERFACE BOARD 10-1. Installation of the SA-K97U 3. yourself on sharp edges and metal parts inside the VCR. Note: 10-2. SA-K97U Specifications 9-pin connector specifications Data format 5 5 5 5 5 10-3. SA-K97U RS-232C Protocol & Commands RS-232C protocol JVC table-1 JVC base table 10-3. SA-K97U RS-232C Protocol & Commands This section provides technical data for programmers. 30H 0AH Command description TXD B0H 33H 40H RXD 0AH 0AH 0AH 01H (or 05H) Search start Time 2-2 VCR setting commands TXD 7EH 30H 33H RXD 0AH 0AH 0AH Time 40H 0AH TXD 8EH RXD 0AH Time 30H 0AH 39H 0AH 33H 0AH 30H 0AH 39H 0AH 38H 0AH TXD 8FH RXD 0AH Time 31H 0AH 35H 0AH 32H 0AH 39H 0AH 35H 0AH 39H 0AH 2-3 Commands for VCR status verification * 2-4 Others (Input data correction/Error cancellation) TXD 7EH 30H 32H RXD 0AH 0AH 0AH Time 41H 0AH 33H 0AH 40H 0AH 3 Commands reference chart 11-1 Rear Panels Input/Output 11 APPENDIXES 11 APPENDIXES 11-2 Specifications [Time/date] [Alarm] [Video System] [Audio system]