16 EN | INITIAL SETTINGS (cont.) |
Turn on the VCR and the TV, and select the AV mode on the TV.
VCR TV CABLE/DBS
1 2 3
4 5 6 7
7 8 9
0
5 34
234 67
After installation, set the cable box output’s channel and its brand correctly; otherwise, the Controller cannot work correctly.
1 Turn on cable boxSelect a channel other than channel 9 on your cable box.
2Access Main Menu screen on VCRPress MENU.
3Access Tuner Set Up screenPress %fi to move the highlight bar (arrow) to “TUNER SET UP”, then press OK.
4Access Cable Box Set screenPress %fi to move the |
| TUNER SET UP | |
highlight bar (arrow) to |
| ||
BAND | CATV | ||
“CABLE BOX SET UP”, | |||
AUTO CHANNEL SET UP | |||
then press OK. | MANUAL CHANNEL SET | ||
| GUIDE CHANNEL SET |
3 CABLE BOX SET UP
DBS RECEIVER SET UP
PRESS (5∞), THEN (OK)
PRESS (MENU) TO END
5Select cable box output channelYour selection depends on how your cable box is connected to your VCR.
●If your cable box is
connected to your VCR’s ANTENNA IN terminal on the rear panel
Press @ # until the channel number representing the cable box’s output (CH2 – CH9) appears on the screen.
●If your cable box is connected to your VCR’s AUDIO/VIDEO IN connectors on the front panel Press @ # until “ON
●If your cable box is connected to your VCR’s AUDIO/VIDEO IN
Press @ # until “ON
●If you do not use a cable box
Press @ # until “OFF” appears on the screen.