EN 19
Turn on the VCR and the TV, and select the AV mode on the TV.
VCR TV CABLE/DBS
1 2 3
4 5 6
7 8 9
0
34 5
234
After installation, set the DBS receiver’s input channel and its brand correctly; otherwise, the Controller cannot work correctly.
1 Turn on DBS receiverSelect a channel other than channel 55, 100 or 205 on your DBS receiver.
2Access Main Menu screen on VCR
Press MENU.
3Access Tuner Set Up screen
Press %fi to move the highlight bar (arrow) to “TUNER SET UP”, then press OK.
4Access DBS Receiver Set screenPress %fi to move the | TUNER SET UP |
| |
highlight bar (arrow) to | BAND | CATV | |
“DBS RECEIVER SET | |||
AUTO CHANNEL SET UP |
UP”, then press OK. | MANUAL CHANNEL SET | ||
GUIDE CHANNEL SET | |||
| |||
| CABLE BOX SET UP | ||
| 3 DBS RECEIVER SET UP |
| |
| PRESS (5∞), THEN (OK) | ||
| PRESS (MENU) TO END |
5 Select DBS receiver input channel Your selection depends on how your DBS receiver is connected to your VCR.
● If your DBS receiver is connected to your VCR’s ANTENNA IN terminal on the rear panel
Press @ # until the channel number representing the DBS
receiver’s output (CH3 or CH4) appears on the screen.
●If your DBS receiver is connected to your VCR’s AUDIO/VIDEO IN connectors on the front panel Press @ # until “ON
●If your DBS receiver is connected to your VCR’s AUDIO/VIDEO IN
Press @ # until “ON
Press @ # until “OFF” appears on the screen.
CONTINUED ON NEXT PAGE \