Masterpage:Right-NoTitle0
EN 21
Filename [VS30U_1a-EN.fm]
Page 21 January 31, 2002 3:35 pm
Setting cable box's brand and channel
After installation, set the cable box’s brand and channel
correctly; otherwise, the Controller cannot work
correctly.
ATurn on the VCR.
Press POWER.
BTurn on the cable box.
Turn on the cable box’s power.
CAccess the Main Menu screen on the VCR.
Press MENU.
DAccess the Initial Set screen.
EAccess the Cable Box Set screen.
FSelect the cable box’s channel.
Your selection depends on how
the cable box is connected to
your VCR.
If the cable box is connected
to your VCR’s ANTENNA IN
connector on the rear panel,
press rt until the channel
number representing the cable
box’s output (CH2 – CH9) appears on the screen.
If the cable box is connected to your VCR’s AUDIO/
VIDEO IN connectors on the rear panel, press rt until
“ON L-1 (REAR)” appears on the screen.
If you do not use a cable box, press rt until “OFF”
appears on the screen.
Turn on the TV and select the AV mode.
123
456
789
0
2
4
1
3
T W
DV S-VHS
Press rt to move the
highlight bar (arrow) to
“INITIAL SET”, then press OK
or e.
Press rt to move the
highlight bar (arrow) to
“CABLE BOX SET”, then
press OK or e.
VS30U_1a-EN.fm Page 21 Thursday, January 31, 2002 3:35 PM