Masterpage:Right-NoTitle0
EN 17
Filename [VS30U_1a-EN.fm]
Page 17 January 31, 2002 3:35 pm
Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually. First follow steps 1 to 4 in
“Preparations” (墌pg.16), then go to the following steps.
NOTE:
The time set previously will be erased when “AUTO CLOCK”,
“HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.
ASet “Auto Clock” to “ON”.
BSelect the host channel.
You can either select “AUTO” or enter a PBS channel
number.
Press OK or e to move the highlight bar to “HOST CH”,
then press rt repeatedly until “AUTO” or the desired
PBS channel number is selected.
NOTE:
Some PBS channels do not transmit clock setting data.
CSelect the D.S.T. mode.
Press OK or e to move the highlight bar to “D.S.T.”, then
press rt repeatedly until the desired setting is selected.
AUTO: Select if you want to adjust your VCR’s clock
automatically by the incoming signal from the
host channel. Be sure to select the correct time
zone manually in step 4.
ON: Adjustment will be made by the built-in clock
itself.
OFF: Select when Daylight Saving Time does not apply
to you.
DSelect the time zone.
Press OK or e to move the highlight bar to “TIME
ZONE”, then press rt repeatedly until “AUTO” or the
desired time zone is selected. Each time you press the
button, the time zone changes as follows:
{ AUTO { ATLANTIC { EASTERN { CENTRAL
{ MOUNTAIN { PACIFIC { ALASKA { HAWAII
{ (back to the beginning)
NOTE:
If an incorrect time is displayed by the Plug & Play function, you
may be receiving the clock setting data of a PBS channel from an
adjacent time zone or from an incorrect PBS channel from a
cable TV system. If you selected “AUTO” for the host channel in
step 2, be sure to select the correct time zone manually.
EComplete the Semiauto Clock Set.
Press MENU to return to normal screen.
Manual Clock Set
First follow steps 1 to 4 in “Preparations” (墌pg.16), then go to
the following steps.
ASet time, date and year.
BSelect D.S.T. mode.
CStart clock.
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or e repeatedly until the item you want to
change blinks, then press rt.
Press OK or e repeatedly to
move the highlight bar to
“AUTO CLOCK”, then press
rt so that “ON” is selected.
IMPORTANT
Turn off the VCR after performing Semiauto Clock. “Auto”
will appear on the display panel while the clock is being set.
The current clock time will appear automatically when the
clock setting is complete.
AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR’s
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
Press rt until the desired
time appears, then press OK
or e. Set the date and year in
the same way.
●Holding rt changes the time
in 30-minute intervals, or
changes the date in 15-day
intervals.
Press OK or e to move the
highlight bar to “D.S.T.”, then
press rt to select the
desired setting.
ON: Adjustment will be
made by the built-in
clock itself.
OFF: Select when Daylight
Saving Time does not
apply to you.
VS30U_1a-EN.fm Page 17 Thursday, January 31, 2002 3:35 PM