Thank you for purchasing a JVC speaker system. Before you begin using these speakers, please read the instructions carefully to be sure you get the best possible performance. If you have any questions, consult your JVC dealer.

Warnings, Cautions and Others

Precautions for installation

•Do not install the speakers on an uneven surface or in a place subject to vibration; otherwise, they may fall over, causing damage or injury.

–Take the occurrence of earthquakes or other physical shocks into consideration when selecting the installation place, and secure the speakers thoroughly.

•To prevent deformation or discoloration of the cabinet, do not install the speakers where they are exposed to direct sunlight or high humidity, and avoid installation near air conditioning outlets.

•Speaker vibrations may cause howling. Place the speakers as far away from the player as possible.

•The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers.

–When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the

speakers.

Then wait at least 30 minutes before turning on the TV’s main power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers further away from the TV.

Precautions for Daily Use

•To maintain the appearance of the speakers

Wipe with a dry, soft cloth if the cabinet or control panel should become dirty.

If very dirty, apply a small amount of water or neutral detergent to the cloth and wipe clean, then wipe with a dry cloth.

•To improve the sound field

If the speakers are facing a solid wall or glass door, etc., it is recommended to furnish the wall with materials that absorb sounds, for example by hanging up thick curtains, to prevent reflections and standing waves.

•To use the speakers without any trouble

–Do not reproduce sounds at so high a volume that they are distorted; otherwise, the speakers may be damaged by internal heat buildup.

–When moving the speakers, do not pull the speaker cords; otherwise, the speakers may fall over, causing damage or injury.

Connection

Connecting the speaker system to the amplifier

•Connect the LEFT speaker terminals of the amplifier to the terminals of the LEFT speaker and RIGHT to RIGHT and CENTER to CENTER using the attached speaker cords as shown in the figure making sure polarity is correct; (+) to (+) and (–) to (–). Connect the black speaker wire to the (–) terminal.

•Turn off power to the whole system before connecting the speakers to the amplifier.

•The nominal impedance of the SX-A305 is 8 Ω. Select for use

an amplifier to which a speaker system with the load impedance of 8 Ω can be connected.

•The maximum power handling capacity of the SX-A305 is 100 W. Excessive input will result in abnormal noise and possible damage. In cases where the signals described below are applied to the speakers, even if the signals are below the maximum allowable input, they may cause an overload and burn the wiring of the speakers. Be sure to lower the amplifier volume beforehand.

1)Noise during FM tuning.

2)High level signals containing high frequency components produced by a tape deck in the fast forward mode.

3)Click noise produced when turning power of other components on and off.

4)Click noise produced when connecting or disconnecting cords with the power on.

5)Click noise produced when the cartridge is replaced with the power on.

6)Click noise produced when operating amplifier switches.

7)Continuous high frequency oscillation or high pitch electronically produced musical instrument sound.

8)Howling when using a microphones.

Checking the supplied Accessories

•Chek to be sure you have the following supplied accessories. The number in parenthesis indicates the quantity of the piece supplied.

Speaker cords

Approx. 5 m (3: for satellite speakers placed in front position and a center speaker)

Approx. 10 m (2: for satellite speakers placed in surround position)

To remove the speaker grilles

The speaker grilles are removable.

Speaker grille

Projections

Holes

To remove the speaker grille, insert your fingers at the top of the speaker grille, pull towards you. Then pull the bottom towards you.

To attach the speaker grille, follow the illustration above.

– 1 –

Page 1 Page 3
Page 2
Image 2
JVC SX-A305 manual Connection
Page 1 Page 3

SX-A305 specifications

The JVC SX-A305 is a sophisticated and versatile audio system that has garnered attention for its impressive sound quality and advanced features. As part of JVC’s commitment to providing high-quality audio solutions, the SX-A305 incorporates a range of technologies aimed at enhancing the listening experience.

One of the standout features of the JVC SX-A305 is its robust amplification system. With a powerful output, this system is designed to deliver clear and dynamic sound across a wide frequency range. Whether you're listening to music, watching movies, or playing video games, the SX-A305 provides an immersive auditory experience. The system supports a variety of audio formats, ensuring compatibility with various devices and content types.

Another notable characteristic of the SX-A305 is its ability to connect seamlessly with modern devices. Equipped with Bluetooth technology, this audio system allows for wireless streaming from smartphones, tablets, and laptops. Users can enjoy their favorite playlists without the hassle of cords, making it a convenient choice for both home and on-the-go use. Additionally, the SX-A305 supports USB connectivity, enabling direct playback from USB flash drives, which broadens its usability.

The JVC SX-A305 also includes built-in equalizers and sound presets, allowing users to tailor their listening experience according to their personal preferences. The intuitive interface makes it easy to adjust settings, while pre-configured modes optimize audio performance for different genres of music.

Furthermore, this audio system features a sleek and modern design, making it an attractive addition to any room. The construction is not only stylish but also engineered for durability, ensuring long-lasting performance.

Lastly, JVC has incorporated various safety features into the SX-A305, including overcurrent and thermal protection, which safeguard the device and enhance its reliability during prolonged use.

In conclusion, the JVC SX-A305 stands out as a formidable audio system that combines innovative technology, user-friendly features, and aesthetic appeal. Whether you're a casual listener or an audiophile, the SX-A305 is designed to meet diverse audio needs, making it a worthwhile investment for anyone looking to elevate their sound experience.
Top Page Image Contents