Sound and monitor settings

4Select an appropriate audio input according tothe audio connection. ( 9)

2CH

For connection via the

AUDIO IN jacks

 

5.1CH

For connection via the

AUDIO MULTI IN jacks

 

COAX

For connection via the

COAXIAL jack

 

OPT

For connection via the

OPTICAL terminal

 

You can select the following settings for each source (underlined items are the initial settings for each source):

–“VIDEO1”: 5.1CH*2, COAX*3 and OPT*3

–“VIDEO2”: 2CH, COAX*3 and OPT*3

–“VIDEO”: 2CH and OPT

If your System is the TH-D7, make the audio input setting for both “VIDEO1” and “VIDEO2.”

*1“AIN.1:” or “AIN.2:” appears for TH-D7, and “AIN.” for TH-D5.

*2TH-D7 only: When the speaker position mode is set to “S.SPK F,” “5.1CH” cannot be selected.

*3TH-D7 only: It is not possible to select the same audio input setting for “VIDEO1” and “VIDEO2.” For example, when “COAX” is assigned to “VIDEO1,” it cannot be selected for “VIDEO2.” When the item you want cannot be selected, see

“Troubleshooting” for details. ( 34)

Selecting the color system and scanning mode

Select the color system and scanning mode for the sources “DVD” and “USB” according to the type of TV and to connection method.

To use the progressive scanning mode, connect a TV supporting progressive video signals to the HDMI MONITOR OUT terminal or COMPONENT jacks.

( 8)

1Select “DVD” or “USB” as the source.

( 12)

2 «Hold

The number of scanning lines

 

Color system

Scanning mode

 

PAL: PAL

I: Interlaced

 

NT: NTSC

P: Progressive

See page 13 for button locations.

3Select an appropriate color system and scanning mode, then confirm the selection.

SelectConfirm

•When connecting the TV via the HDMI MONITOR OUT terminal, the following items are selectable:

AUTO, PAL 576P, PAL 720P, PAL 1080I, NT 480P, NT 720P and NT 1080I

– Normally select “AUTO.”

When “AUTO” is selected, the System automatically emits the video signal to get the best picture quality on your TV.

The HD indicator lights when the System is emitting “720P” (PAL/NT) or “1080I” (PAL/NT) video signals.

•When connecting the TV via COMPONENT jacks, S-VIDEO or VIDEO jack, the following items are selectable:

PAL 576I, PAL 576P, NT 480I and NT 480P

–When connecting the TV via the S-VIDEO or VIDEO jack, selecting a progressive scanning mode does not affect the picture.

If another TV is connected through the HDMI MONITOR OUT terminal, you cannot change the color system and scanning mode for the TV connected through the COMPONENT jacks, S- VIDEO or VIDEO jack.

You can get better picture quality in the progressive scanning than in the interlaced scanning.

When the color system and/or scanning mode does not correspond to that of the TV, the picture is not displayed normally.

15