
HDMI Connection
About HDMI
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or
Connection to an HDMI TV requires an HDMI cable while connection to a
HDMI has the capability to support standard, enhanced, or
HDMI, the HDMI logo and
If you have a HDMI TV or monitor, you can connect it to this DVD/CD Receiver using a HDMI cable.
1.Connect the HDMI OUT jack on the DVD/CD Receiver to the HDMI jack on a HDMI compatible TV or monitor (H).
2.Set the TV’s source to HDMI (refer to owner’s manual for TV).
Notes:
•The arrow on the cable connector body should face down for correct alignment with the connector on the DVD/CD Receiver.
•If there is noise or there are lines on the screen, please check the HDMI cable.
•Not all
•If TV does not support HDCP, snow noise appears on the screen, or picture may be vibrated.
If you play the
HDMI compatible TV | HDMI |
H
Rear of DVD/CD Receiver
Resolution setting
You can change the resolution for component video and HDMI output.
To change the resolution using setup menu to select the desired resolution - Auto, 480i, 480p, 720p, 1080i, 1080p.
Available resolution according to connection
HDMI OUT - Auto, 1080p, 1080i, 720p and 480p
COMPONENT VIDEO OUT - 480p and 480i
VIDEO OUT - 480i
Note:
If your TV does not accept your resolution setting, abnormal picture appears on the screen.
Please read owner’s manual for TV, and then set the resolution that your TV can accept.
Installation and Setup
8