E-16
Installation and connection
1.
Follow steps 1 ~ 5 of Mounting the Base
to the Ceiling.
(page 10 & 11)
2.
Loosen the set screws (M3 ×6mm) with
a flat-head screwdriver and remove the
plug on the main unit side.
3.
Insert the removed plug into the conduit
hole on the bottom of the camera.
4.
Screw in the pipe into the conduit hole
on the main unit side.
5.
Steps hereafter are the same as when
installing the dome camera to the ceiling.
See pages 12 through 15.
When installation cannot be made to the ceiling, use the conduit hole on the main unit side
to install to the pipe.
CAUTION
When installing the pipe to the conduit hole
(side), do not screw in the thread portion
of the pipe more than 12mm(15/32").
Screwing in the pipe into the base more
than required may damage the base
interior.
2.
4.
3.
Set screw
Conduit
plug
When the Dome camera cannot be installed to the CeilingE-17
English
When installing the Dome camera to the electrical box
1.
Follow steps 1 ~ 3 of Mounting the Base
to the Ceiling.
(page 10)
2.
Use the 2 mounting holes to fix the box
to the base.
3.
Steps hereafter are the same as when
installing the dome camera to the ceiling.
See pages 12 through 15.
When installation cannot be made using the conduit holes, install the dome camera to the
electrical box.
CAUTION
Use M4 screws or bolts for attaching to
the ceiling.
4 Inch squara electrical box
Mounting
holes
Not
Supplied