Setup

Setting the Switches

Before mounting the camera, set the function setting switches on the camera. To set the switches, use a fine-tipped screwdriver.

Function selection switches

.F

ADJ

MENU

 

 

DIP SW

 

D/N AUTO 1

OFF

 

BLC OFF 2

ON

MONITOR LCD 3

CRT

TYPE

NOT USED 4

 

 

 

SEE INSTRUCTION

 

MANUAL

 

DIP Switch Settings Chart

1[D/N AUTO/OFF] Easy Day & Night Switch

Set this to "AUTO" when shooting a subject with continually changing brightness (day/night). The image switches to color when the subject is bright, and black and white when it is dark. The image is set to color at all times when "OFF" is selected. (Default setting: AUTO)

2[BLC OFF/ON] Backlight Compensation Selector Switch

Set this to "ON" when shooting in backlight. The subject becomes easier to see as brightness is adjusted according to the photometry area set in [BLC AREA] of the menu.

(Default setting: OFF)

Memo Refer to [BLC AREA] in the "MENU SETTING" (separate).

3[MONITOR TYPE LCD/CRT] Monitor Type Selector Switch

Set this to "LCD" or "CRT" according to the monitor in use. (Default setting: LCD)

Memo Refer to [LCD TYPE] in the "MENU SETTING" (separate).

9