Installation

Mounting the Camera (Continued)

2Mount the dome cover

①Clean the dust and dirt on the dome cover.

②Align the position marks (3 locations) on the camera unit and dome cover, followed by pressing in directly to mount the cover.

③Tighten the dome cover fastening screw.

.

.

Note

Position alignment mark (x 3)

Dome cover

Dome cover protective sheet

vEnsure that the silica gel (provided) has been inserted before mounting the dome cover.

vBe sure to secure the dome cover firmly. If it is not firmly secured, the cover can drop or the humidity inside the camera can increase and fog up the interior of the cover.

vWhen the cover is removed again after mounting the dome cover, the field angle may changed. If the field angle is changed, re-adjust the focus and the field angle.

vEnsure that the fall prevention wire of the dome cover is not caught between the dome cover and the base. Failure to do so may prevent the dustproof and waterproof functions from working properly.

18