JVC TM-H1700G manual Controls and Features, Front View Rear View

CONTROLS AND FEATURES

FRONT VIEW

REAR VIEW

<Front Panel>

<Rear Panel>

12

VIDEO A

REMOTE

10	CHROMA CONTRAST	VOLUME/SELECT
0C	PHASE BRIGHT

1 2 3

1 Chroma/Phase button

[ CHROMA/ PHASE]

Press this button to activate the picture color density adjustment mode or picture hue adjustment mode. Each time you press the button, the adjustment item changes.

Picture color density f Picture hue

MENU	UNDER	A	B	POWER
	SCAN

INPUT SELECT

4 5 6 7 8 9

6 Input A (VIDEO) button [INPUT SELECT A]

Selects the video and audio signals input to the VIDEO A

@and AUDIO A % terminals on the rear panel. The button lights when selected.

7 Input B (VIDEO Y/C) button [INPUT SELECT B]

Selects the video and audio signals input to the VIDEO B

13

14

15

16

INOUT

VIDEO B

INOUT

INY/C

OUT

AUDIO A

INOUT

AUDIO B

INOUT

11

VIDEO A

VIDEO B

Y/C

AUDIO A

AUDIO B

No.51922

Adjust the value with the VOLUME/SELECT buttons 3. Also used as a control button in the menu function mode.

2 Contrast/Brightness button

[CONTRAST / BRIGHT ]

Press this button to activate the picture contrast adjust- ment mode or picture brightness adjustment mode. Each time you press the button, the adjustment item changes.

Picture contrast f Picture brightness

Adjust the value with the VOLUME/SELECT buttons 3. Also used as a control button in the menu function mode.

3 Volume/Select buttons [VOLUME/SELECT – +]

Adjusts the speaker volume. Also used as a control button in the menu function mode.

4 Menu button [MENU]

Displays and disappears the <MENU> screen. Pressing the CHROMA/PHASE button 1 with the Menu button depressed will display the <SET-UP MENU> screen.

5 Under Scan button [UNDER SCAN]

Reduces the screen size to display the entire image. Press the button again to cancel Under Scan. When selected, the Under Scan button lights.

#or VIDEO B (Y/C) $ and AUDIO B ^ terminals on the rear panel. The button lights when selected.

Note:

●The VIDEO B terminals include a video terminal (BNC connector) and a Y/C terminal (mini-DIN 4-pin connec- tor). The Y/C (S-video) terminal has priority.

8 Power indicator

Unlit : The main power is OFF.

Orange : The main power is ON, but the monitor’s power is OFF (in the stand-by mode).

Green : The main power is ON, and the monitor’s power is ON (in the normal operation mode).

9 Power switch [POWER]

Press the power switch to turn the monitor’s power ON or OFF when the main power is ON.

Note:

●When RUSH DELAY is set to SLOW, it takes about three seconds before power is actually supplied after the power switch is pressed.

10 Speaker

A built-in speaker is located inside the right side panel when the monitor is viewed from the front.

11 REMOTE (external control) terminal

Connect this terminal to an external control unit to enable remote operation of the monitor.

Refer to the HOW TO USE EXTERNAL CONTROL on page 15 for more details.

12 Video A terminals [VIDEO A IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

Notes:

*For corresponding audio signals, use the AUDIO A terminals %.

*Also refer to BASIC CONNECTION EXAMPLE on page 13.

13 Video B terminals [VIDEO B IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

Notes:

*For corresponding audio signals, use the AUDIO B terminals ^.

*Also refer to BASIC CONNECTION EXAMPLE on page 13.

14 Video B (Y/C) terminals [VIDEO B Y/C IN/OUT]

Y/C (S-video) signal input (IN) and output (OUT) termi- nals. The output terminal is bridge-connected.

IN : Y/C-separated (S-video) video signal input terminal

OUT : Bridge-connected Y/C-separated (S-video) signal output terminal.

Notes:

*For corresponding audio signals, use the AUDIO B terminals ^.

*When both VIDEO B terminals are connected (input) at the same time, the Y/C terminal has priority.

*Also refer to BASIC CONNECTION EXAMPLE on page 14.

15 Audio A terminals [AUDIO A IN/OUT]

Input (IN) and output (OUT) terminals for the audio signal corresponding to the VIDEO A terminals @.

The output terminal is bridge-connected. IN : Audio signal input terminal

OUT : Bridge-connected audio signal output terminal

Notes:

*For corresponding video signals, use the VIDEO A terminal @.

*Also refer to BASIC CONNECTION EXAMPLE on page 13.

16 Audio B terminals [AUDIO B IN/OUT]

Input (IN) and output (OUT) terminals for the audio signals corresponding to the VIDEO B terminals # VIDEO B (Y/C) $.

The output terminal is bridge-connected.

IN	: Audio signal input terminal
OUT	: Bridge-connected audio signal output terminal

Notes:

*For corresponding video signals, use the VIDEO B terminals # or VIDEO B (Y/C) terminals $.

*Also refer to BASIC CONNECTION EXAMPLE on pages 13 and 14.

ENGLISH

4

1-3

5

TM-H1700G