JVC TM-H1700G manual Video Signal Controls, Display and Selection in the Menu Screen Mode Setting

HOW TO HANDLE BASIC OPERATIONS (cont’d)

VIDEO SIGNAL CONTROLS

Use these buttons for video signal control.

UNDER SCAN

Press the UNDER SCAN button to reduce the size of display area so that the whole picture is displayed on screen. Use to check the picture frame.

HOW TO USE THE MENU FUNCTIONS

DISPLAY AND SELECTION IN THE <MENU> SCREEN MODE (SETTING)

You can set the following menu items.			<MENU> screen
		1				< MENU >
Set them depending on your needs.					SHARPNESS		: 00
• SHARPNESS	• COLOR SYSTEM			‰
					ADJ. BAR POSI.		: LOWER
• ADJ. BAR POSI.	• RUSH DELAY				COLOR TEMP.		: 6500
					COLOR SYSTEM		: AUTO
• COLOR TEMP.	• ASPECT RATIO				RUSH DELAY		: STD
1. Press the MENU button.		2			ASPECT RATIO		: 4-3	3
MENU	The <MENU> screen is displayed.					EXIT			4
	* The on-screen display goes off automatically after about five
	minutes with operation performed.

2.Press the CHROMA/PHASE or CONTRAST/BRIGHT button to select MENU items.

CHROMA CONTRAST	VOLUME/SELECT	MENU
PHASE BRIGHT

No.51922

CHROMA CONTRAST

PHASE BRIGHT

SHARPNESS

ADJ. BAR POSI.

COLOR TEMP.

COLOR SYSTEM

RUSH DELAY

A selection mark (4) is put next to the selected item.

Front panel	Function	Contents
button	displayed
CHROMA/		Forward selection mark (4)
PHASE
CONTRAST/		Reverse selection mark (4)
BRIGHT

<Front panel buttons>

1Selection mark (4): Indicates the

menu item you select.

2 Menu item: Menu items you can select.

3 Setting display: Indicates the current settings (value).

4 Function display: The functions of the front panel buttons (5 buttons on the left) correspond to the function displayed.

ENGLISH

ASPECT RATIO

3. Press the VOLUME/SELECT buttons to set.

VOLUME/SELECT	Front panel	Function	Contents
	button	displayed
	VOLUME/	+	Increase (to max. value)
	SELECT (+)	4	Forward the setting value
	VOLUME/	–	Decrease (to min. value)
	SELECT (–)	1	Reverse the setting value

Menu items	Purpose				Setting range
SHARPNESS	Picture sharpness	00 +01 • • • • • • • • • • • •					+39 +40
ADJ.BAR POSI	Volume bar position	LOWER			UPPER
COLOR TEMP.	Color temperature of white	6500	9300
	balance
COLOR SYSTEM	Color system	AUTO		NTSC		AUTO	PAL
RUSH DELAY	Delay value	STD.		SLOW
ASPECT RATIO	Aspect ratio	4-3	16-9

*For normal use, leave the COLOR SYSTEM setting to AUTO.

If reception is unsatisfactory in AUTO position, set it to the appropriate color system mode (NTSC or PAL).

*When REMOTE SYSTEM is set to MAKE, and REMOTE ENABLE signal is short circuited (ON), "REMOTE" is displayed on the ASPECT RATIO setting menu, and Aspect ratio cannot be operated from the front panel.

4.If you want to set the other menu items, repeat procedures 2 and 3.

5.Press the MENU button to quit.

Function	Contents
displayed
	Forward the menu item.
	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
4	Forward the setting value.
1	Reverse the setting value.
EXIT	Exits the <MENU> screen.

●When the screen aspect ratio is set to 16 - 9 (16:9) in ASPECT RATIO, the picture will be vertically reduced.

<ADJ. BAR POSI> screen UPPER

BRIGHT : 00

BRIGHT : 00

EXIT

LOWER

CHROMA CONTRAST	VOLUME/SELECT	MENU
PHASE BRIGHT

8

1-5

MENU	Front panel	Function	Contents	<Front panel buttons>
	button	displayed		The upper screen; when setting
				“UPPER” in “ADJ. BAR POSI.”
			Quit (or Release) the <MENU>
	MENU	EXIT		The lower screen; when setting
			screen
				“LOWER” in “ADJ. BAR POSI.”

9

TM-H1700G