JVC TM-H1900G, TM-H1700G manual HOW to USE the Menu Functions cont’d, Volume, Select +

HOW TO USE THE MENU FUNCTIONS (cont’d)

DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING)

You can set the following set-up menu items.

• PICTURE SUB ADJ.	• WHITE BALANCE	• REMOTE SYSTEM
• H. POSITION	• CONTROL LOCK	• INPUT REMOTE
• V. POSITION	• STATUS DISPLAY

Notes:

●Parameters for PICTURE SUB ADJ., H. POSITION and V. POSITION can be set separately depending on the signal (Input A (VIDEO), Input B (VIDEO) or Input B (Y/ C)) selected with the input select buttons on the front panel.

Select the required video input with the input select buttons on the front panel in advance.

●WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature value.

Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.

●INPUT REMOTE is shown when REMOTE SYSTEM is set to MAKE.

<SET-UP MENU> screen

1<SET-UP MENU>

4 PICTURE SUB ADJ.

H. POSITION	:	00
V. POSITION	:	00
WHITE BALANCE
CONTROL LOCK	: OFF
STATUS DISPLAY	: ON
REMOTE SYSTEM	: MAKE
INPUT REMOTE	: A – B
2		3
EXIT		4
CHROMA CONTRAST VOLUME/SELECT		MENU
PHASE BRIGHT

1.While pressing the MENU button, press the CHROMA/PHASE button.

CHROMA MENU The <SET-UP MENU> screen is displayed.

PHASE

2.Press the CHROMA/PHASE or CONTRAST/BRIGHT button to select the desired menu item.

<Front panel buttons>

1Selection mark (4): Indicates the

menu item you select.

2Menu item: Menu items you can select.

3Setting display: Indicates the

current settings (value).

4Function display: The functions of the front panel buttons (5 buttons on the left) correspond to the function displayed.

CHROMA CONTRAST

A selection mark (4) is put next to the selected item.

Function

Contents

		Front panel	Function	Contents
PHASE BRIGHT		button	displayed
		CHROMA/		Forward selection mark (4)
PICTURE SUB ADJ.		PHASE
	H. POSITION
		CONTRAST/		Reverse selection mark (4)
	V. POSITION	BRIGHT
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
REMOTE SYSTEM
INPUT REMOTE

3. Press the VOLUME/SELECT buttons to set.

VOLUME/SELECT	Front panel	Function	Contents
	button	displayed
	VOLUME/	+	Increase (to max. value)
		4	Forward the setting value
	SELECT (+)
		CUTO	Selects CUT OFF setting screen
	VOLUME/	–	Decrease (to min. value)
	SELECT (–)	1	Reverse the setting value
		DRV	Selects DRIVE setting screen

Notes:

●For WHITE BALANCE items, select the CUT OFF or DRIVE setting screen, then select the function display for adjustment.

●Press the EXIT (MENU) button to return to the <SET-UP MENU> screen.

displayed
	Forward the menu item.
	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
4	Forward the setting value.
1	Reverse the setting value.
EXIT	Exit the <SET-UP MENU>
	screen.
DRV	Selects DRIVE adjustment.
CUTO	Selects CUT OFF
	adjustment.
RB	Adjusts red and blue
	signal level.
RGB	Adjusts red, green and
	blue signal level.
	Turns the ON-SCREEN
	display on or off. (This
DISP	function is effective only
	in the DRIVE or CUT OFF
	adjustment mode.)

10