Connecting the speaker cord

Attach to the speakers

When you connect the supplied speaker cord to the terminal clamp of the speakers, fold the end of each speaker cord to avoid short-circuit.

1. Fold the end of each speaker

2. Press and hold the terminal

3. Insert the speaker cord, and

cord.

clamp.

release the finger from the

 

 

terminal clamp.

•Connect the cord with black stripes to the · (black) terminal and the other cord to the ª (red) terminal.

•Be careful that connection of the speaker cords to incorrect polarity terminals (ª and ·) degrades stereo feeling and sound qualities.

Attach to the display

1. Press and hold the terminal

2. Insert the speaker cord, and

clamp.

release the finger from the

 

terminal clamp.

•Connect the cord with black stripes to the · (black) terminal and the other cord to the ª (red) terminal.

•Be careful that connection of the speaker cords to incorrect polarity terminals (ª and ·) degrades stereo feeling and sound qualities.

ENGLISH

Bundling the speaker cords

You can bundle the speaker cords neatly with the supplied cord clamp, as illustrated.

•Stick the cord clamp after removing its protective seal. Give an amount of time before bundling the speaker cords, or the cord clamp may be detached.

•If you are sticking the cord clamp to the back of the display, be careful not to block the ventilation hole.

Cord clamp

Speaker cord

Specifications

• Power Handling Capacity

:

3 W

• Impedance

:

6 Ω

• Speaker

: 9.5 cm x 1 cm

 

 

Direct Drive Speaker, two

• Dimensions

 

 

(W x H x D)

: 43 mm x 640 mm x 43 mm

(Mass)

:

0.7 kg (for each excluding the speaker bracket)

5