REMOTE PROGRAMMING
Setting the CATV or Satellite receiver
You can program your remote to operate your cable box, satellite receiver by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the search code function, use the remote control supplied by the manufacturer.
Cable Box or Satellite setup
The remote control is programmed with CATV and/or Satellite codes for power on, power off, channel up, channel down, and 10 key operation.
1.Find the CATV/Satellite brand from the list of codes shown below.
2.Slide the
3.Press and hold down the CALL button.
4.With the CALL button held down, enter the first code number listed using the 10 key pad.
5.Release the CALL button.
6.Confirm the operation of the Cable Box/Satellite receiver.
•If your CATV or Satellite box does not respond to the first code, try the others listed. If it does not respond to any code, try the Search Codes Function at the bottom of the page.
Cable Box | CODES | Cable Box | CODES | Digital | CODES |
|
|
|
| Satellite |
|
ABC | 024 | Puser | 032 |
| |
System |
| ||||
|
|
|
|
| |
Archer | 032, 025 | RCA | 061, 070 |
|
|
Cableview | 051, 032 | Realistic | 032 | Echostar | 100, 113, 114 |
Citizen | 022, 051 | Regal | 058, 064, 040, 041, 042, 045, | Express VU | 100, 113 |
Curtis | 058, 059 |
| 068 | G.E. | 106 |
Dlamond | 024, 032, 025 | Regency | 034 | G.I. | 108 |
Eagle | 029 | Rembrandt | 037, 032, 051, 038 | Gradiente | 112 |
Eastern | 034 | Samsung | 051 | Hitachi | 104, 111 |
|
|
|
|
|
|
GC Brand | 032, 051 | Scientific Atlanta | 057, 058, 059 | HNS (Hughes) | 104 |
Gemini | 022, 043 | SLMark | 051, 047 | Panasonic | 105 |
General instrument | 065, 024, 025, 026, 027, 020, | Sprucar | 051, 066 | Philips | 102, 103 |
|
|
|
|
|
|
| 021, 022, 057, 023 | Strargate | 032, 051 | Primestar | 108 |
|
|
|
|
|
|
Hamlin | 040, 041, 042, 045, 058, 064 | Telecaption | 067 | Proscan | 106, 109, 110 |
Hitachi | 049, 024 | Teleview | 047, 051 | RCA | 106, 109, 110 |
Jerrold | 065, 024, 025, 026, 027, 020, | Texscan | 044 | Sony | 107 |
|
|
|
|
|
|
| 021, 022, 057, 023 | Tocom | 035, 036, 066 | Star Choice | 104, 108 |
|
|
|
|
|
|
Macom | 049, 050,051,054 | Toshiba | 050 | Toshiba | 101 |
Magnavox | 033 | Unika | 032, 025 | Uniden | 102, 103 |
Memorex | 030 | Universal | 022, 032 |
|
|
|
|
|
|
|
|
Movietime | 032, 051 | Videoway | 052 |
|
|
Oak | 039, 037, 048 | Viewstar | 029, 030 |
|
|
Panasonic | 055, 056, 060, 071 | Zenith | 063, 046 |
|
|
|
|
|
|
|
|
Paragon | 063 | Zenith/Drake | 046 |
|
|
|
|
|
|
|
|
Philips | 028, 029, 030, 052, 053, 031, 069 | Satellite |
|
|
|
Pioneer | 047, 062 |
|
|
|
|
Pulsar | 051, 032 |
|
|
|
|
|
|
|
|
|
|
Search Codes Function:
1.Slide the
2.Press the TV POWER and RETURN buttons. Hold for at least three seconds and release.
3.Press TV POWER, see if the CATV or Satellite box responds.
4.If there was a response, press RETURN. The operating codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 52 times without a response, use the remote control which came with the equipment.
5.Press RETURN to exit.
11