Recording
Trouble | Action | |
| • SD card is full. Delete unnecessary files or replace the SD card. | |
Recording cannot be | ||
performed. |
| |
Vertical lines appear on | • Such a phenomenon occurs when shooting a subject illuminated | |
recorded images. | by bright light. This is not a malfunction. | |
| • Turn off the camera, wait for a while, and start recording again. | |
Recording stops by | • Recording stops automatically after 12 hours of continuous | |
recording. | ||
itself. | • The recording media is full. | |
| • Unable to write to the media due to some factors. | |
| • Unable to keep up with the speed of writing to the media. | |
| • Use backlight compensation. | |
| • Set [GAIN UP] to [AGC] or [AUTO]. (! mode only) | |
The recorded subject is | • Set [GAIN] or use a flash. (# mode only) | |
too dark. | • Use [TWILIGHT], [NIGHT & PORTRAIT] and [SLEEPING FACE] | |
| in scene mode menu. | |
| • Set the brightness to the [+] side. | |
The recorded subject is | • Set the backlight compensation to [OFF] if it is being used. | |
too bright. | • Set the brightness to the | |
Digital zoom does not | • Change [ZOOM] to [32X/DIGITAL] or [200X/DIGITAL]. | |
work. | • Digital zoom is not available in the still image recording mode. | |
The focus is not | • Wipe the lens with lens cleaning cloth. | |
• If you are recording in a dark place or a subject that has no | ||
adjusted automatically. | ||
contrast between dark and light, adjust the focus manually. | ||
| ||
The color looks strange. | • Set [WB] in [MANUAL SETTING] appropriately to the light source. | |
(Too bluish, too reddish, | • Select [MWB] in [WB] while holding a sheet of plain white paper in | |
etc.) | front of the camera so that the white paper fills the screen. Keep | |
touching OK until the B indicator appears. | ||
| ||
White balance setting | • This cannot be used if [SEPIA] or [MONOTONE] are selected as | |
effects. | ||
cannot be activated. | • Do not use [TWILIGHT], [NIGHT & PORTRAIT], [FIREWORKS], | |
| and [SUNSET] in scene mode menu. | |
The continuous shooting | • The continuous shooting speed will drop after continuous shots. | |
speed is slow. | • Continuous shooting speed may drop depending on the SD card | |
or under certain recording conditions. | ||
| ||
A band or a ball of bright | • Change the direction of the camera to prevent the light source | |
light appears on the LCD | from coming into view. (A band or a ball of bright light may appear | |
when there is a bright light source near the camera, but this is not | ||
monitor. | ||
a malfunction.) | ||
| ||
• Record videos with high quality mode, such as UXP or XP mode. | ||
occurs when recording |
| |
scenes with fast |
| |
moving or with extreme |
| |
changing in brightness. |
|
EN 75