Listening to the Radio
To select the AM tuner interval spacing

Remote

ONLY

 

Some countries space AM stations 9 kHz spacing, and other countries use 10 kHz spacing.

You can change the AM tuner intervals while the System is on stand by.

1

If the received FM station is hard to listen

FM MODEMONO

STEREO

Remote

ONLY

English

2sec.

•Current interval setting appears on the display.

2Select the interval spacing while current setting appears on the display.

9

0

To select the band (FM or AM)

MONO: Reception will improve though stereo effect is lost. MONO indicator lights up.

STEREO: Normally select this. Stereo effect will be resumed.

To preset the stations

Remote

ONLY

 

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.2Activate the preset number entry mode.

SET/RESUME

•Finish the following process while the indication on the display is flashing.

3Select a preset number for the station you store.

FM AM

You can also carry out the same operation using the FM/AM button on the System.

1 2 3

4

5

6

7 8 9

0 10

Examples:

To select preset number 5, press 5.

To select preset number 15, press

10 →1 →5.

To select preset number 30, press 10 →3 →0.

To tune in to a station

While FM or AM is selected...

Remote control:Main unit:

 

1 sec.

1 sec.

 

 

DOWN

UP

•You can also use the PRESET UP/PRESET DOWN buttons.

4Store the station.

SET/RESUME

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.

•When you repeatedly press the button, the frequency changes step by step.

To stop searching manually, press either button.

memo

•If you preset a station set to MONO, the station is stored with the MONO setting.

10