Playing Back from other equipmentTo connect other equipment

By using an stereo mini plug cord (not supplied), you can connect equipment with analog audio output jacks such as a Digital Audio Player, or a TV, etc.

Stereo mini plug cord (not supplied)

AUX

Portable audio

device,

 

 

Game machine, etc.

(front panel)

 

Quick Portable Link (QP Link)

Remote

 

ONLY

If you connect other equipment such as a digital audio player to the AUX terminal and play it back, the source automatically changes to AUX.

QP LINK

QP Link

Canceled

(No indication)

The QP Link indicator is lit while QP Link is activated.

English

If the audio output on the other equipment is not stereo mini plug type,

Use a plug adapter to convert the stereo mini plug to the corresponding plug of the audio output.

Refer to the manuals supplied with the other equipment.

IMPORTANT

•Always set volume to “VOL-MIN” when connecting or disconnecting the other equipment.

To adjust the sound input level from other equipment

You can adjust the sound input level from the connected equipment, if the incoming signal is too small or too large.

1Select AUX for the source.2Adjust the input level.

2sec.

SET/RESUME

AUX LVL 1

AUX LVL 2

AUX LVL 1: Ordinary input level (factory setting). Suitable for equipment with low output level (such as a portable audio device).

AUX LVL 2: Decreased input level.

Suitable for equipment with high output level (such as a DVD player).

memo

•If you feel that the output level from the external equipment is high, select AUX LVL2.

When QP Link is activated...

•If an audio input is received at AUX when the System is turned on, the source automatically switches to AUX.

•If an audio input is received at AUX when the System is in standby mode, the system automatically turns on and plays the audio.

•You cannot change the source while audio input is being received at AUX.

If you press another source button, the QP Link indicator blinks several times.

memo

•While playback is going on the portable audio device, QP Link may turn the System on even if the Sleep Timer turn the System to standby or if you turn the System to standby. In this case, deactivate QP Link or stop playback on the device connected to the AUX jack.

•If the audio input received at AUX is small, the source may not switch to AUX.

•The source may not switch to AUX depending on the content of the music.

•It takes a second or two for the source to switch to AUX after another equipment such as a digital audio player is started and sound is output. This is due to the System detecting the signal from the equipment.

•QP Link does not work, if the clock indication is turned off at standby.

14