Changing the Display Brightness
You can dim the display window.
DIMMER | DIM 1 | DIM 2 |
|
DIM OFF 
(Initial setting)
DIM 1 Dims the display and the illumination on the main unit.
DIM 2 Dims the display more than DIM 1 and turns off the illumination on the main unit.
Adjusting the Audio Input Level | Remote |
ONLY |
If the sound from a component connected to the AUX jack is too loud or is too quiet, you can change the audio input level through the AUX jack (without changing the volume level). While AUX is selected as a source...
2 sec.
SET | AUX LVL1 AUX LVL2 |
ANT. P. | |
| AUX LVL3 |
| (Initial setting) |
AUX LVL 1 Select this when the sound is too loud.
AUX LVL 2 AUX Level 2 is preset at the intermediate level between Level 1 and 3.
AUX LVL 3 Select this when the sound is too quiet.
Setting the Clock | Remote | |
ONLY | ||
|
Without setting the
•To exit from the clock setting, press CLOCK as required.
•To go back a step, press CANCEL.
1 Activate the clock setting mode.
CLOCK/
TIMER
S.TURBO
QP Link
•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected.
2 Adjust the hour, then the minute.
PRESET/GROUP/PTY | SET | |||
DOWN |
| UP | ANT. P. | |
|
|
|
|
|
Now the
To check the current time during play
DISPLAY | Clock |
MODE |
|
Source information
•For the display modes of Radio Data System, see page 12.
•For the display modes of DAB, see page 16.
Turning Off the Power Automatically | Remote | |
ONLY | ||
Auto Standby |
|
|
2 sec. |
|
|
A. STANDBY | On |
|
Canceled
When Auto Standby is in use, the A.STBY indicator lights on the display.
The A.STBY indicator starts flashing:
•When disc playback stops
•When the sound signal from the AUX jack stops or is too weak
The System will turn off (on standby) automatically if no operation is done for about 3 minutes while the indicator is flashing.
Sleep Timer
You can set the unit to turn off after a certain period of time.
1Specify the time (in minutes).
SLEEP | 10 | 20 | 30 | 60 | 90 | 120 | 150 |
|
Canceled
2Wait until the set time disappears.
To check the time remaining until the shut-off time
SLEEP | SLEEP |
| S.TURBO |
QP Link
•If you press the button repeatedly, you can change the shut- off time.
11