JVC UX-H300 manual Recording on a Tape, Press REC recording

Recording Continued

English

IMPORTANT:

•It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.

•The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.

•If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit.

•You can only use type I tape for recording.

•DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes may be damaged.

•DO NOT use type II and type IV tapes since the unit is not compatible with such tapes.

•The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans.

At the start and end of cassette tapes

There is leader tape which cannot be recorded onto. Thus, when recording from discs, FM/AM broadcasts, or external equipment, wind the leader tape first to ensure that the recording will be made without losing any music.

To protect your recordings

Cassettes have two small tabs on the back to protect against unexpected erasure or re-recording.

To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with adhesive tape.

3 Start playing the source—FM, AM, or auxiliary equipment connected to AUX jack.

•When the source is FM or AM, tune in to the station you want to record.

•When recording from discs, see “Recording Discs— Disc Synchronized Recording” on page 19.

4 Press REC (recording).		REC
	• The REC indicator appears and 3 indicator
	lights up on the display.
	REC
	MHz
5	Press TAPE ¤ ‹.	TAPE
	3 indicator starts flashing and the recording
	starts.

•If no cassette is inserted when you press REC “NO TAPE” appears on the display.

•If a protected tape is inserted when you press REC “PROTECT” appears on the display.

To stop recording for a moment, press REC.			REC
The recording is paused. To resume recording,
press TAPE ¤ ‹.
To stop recording, press 7.	4	7	¢
	DOWN		UP

The recording stops.
To remove the cassette, press PUSH OPEN	PUSH OPEN
while recording is stopped.

Adhesive tape

Recording on a Tape

On the unit ONLY:

1 Put a recordable cassette in with the exposed part of the tape down.

•See also page 15.

2 Close the cassette holder gently.

To record on both sides—Reverse Mode

On the remote control ONLY:

Press REV.MODE (reverse mode) until REV.MODE

or is lit.

•When using the Reverse Mode for recording, lights up and start recording in the forward ( 3 ) direction first.

To cancel the Reverse Mode, press REV.MODE repeatedly

until is lit.

To reduce the beat—Beat Cut

On the remote control ONLY:

If the beats are heard while recording an AM	BEAT CUT
broadcast, press BEAT CUT repeatedly until the
beats are reduced.
• Each time you press the button, the display
alternates between “CUT-1” and “CUT-2.”

18