Lanier 5627, 5622 manual When a dial-up router is connected in a network environment

Important

When the machine is connected to a network, observe the following points when setting up the machine or changing settings.

For more details, see the documentation and Help for ScanRouter V2 Lite/Pro- fessional and DeskTopBinder V2 Lite/Professional.

❖When a dial-up router is connected in a network environment

The settings for the delivery server to be connected must be made appropri- ately for the machine with ScanRouter V2 Link, or DeskTopBinder V2 Lite/ Professional. In addition, appropriately set up connected devices with the I/ O settings of ScanRouter V2 Administration Utility.

If the network environment changes, make the necessary changes for the de- livery server with the machine, administration utility of client computers, ScanRouter V2 Link, and DeskTopBinder V2 Lite/Professional. Also, set the correct information for the connected device with the I/O settings of Admin- istration Utility.

Important

❒When the software is set up to connect to the delivery server via a dial-up router, the router will dial and go online whenever connection to the deliv- ery server is initiated. Telephone charges may be incurred.

❖When connected to a computer that uses dial-up access

• Do not install ScanRouter V2 Lite/Professional on a computer which uses dial-up access.

• When using ScanRouter V2 Lite/Professional, DeskTopBinder V2 Lite/ Professional, ScanRouter V2 Link, or TWAIN driver on a computer with dial-up access, dial-up may be performed when connecting to the delivery server and other equipment, depending on the setup. If the computer is set up to connect to the Internet automatically, the confirmation dialog box will not appear, and telephone charges may be incurred without the user being aware of it. To prevent unnecessary dial-ups, the computer should be set up so that the confirmation dialog box is always displayed before es- tablishing a connection. Do not make unnecessary dial-ups when using the above listed software.

❖When working in a WAN environment

In a WAN environment, do not use the ScanRouter V2 Link or other admin- istration utility installed on a client computer. In some network environ- ments, time-out may occur and normal delivery may not be possible.

iii