Lanier 5622, 5627 manual Initial Scanner Setup, Default Settings

2

Preparations for Use as a Network Scanner

Initial Scanner Setup

This section explains all required settings and procedures for using the machine as a network scanner.

Default Settings

Settings to use the functions of the machine as a network scanner are listed be- low. Make correct setting of necessary items.

Important

❒Items marked (✩) are the minimum required settings for using the machine as a network scanner. Be sure to set these items before use.

❒Items marked (❍) should be set if required.

❖System settings

For information about the explanation of settings, see the System Settings manual.

	Settings		TWAIN	Delivery	Store *3
			*1	*2
Clock timer settings		Scanner Auto Reset Timer		❍	❍
Interface settings		IP Address	✩	✩	✩
[Network]
		Sub-net Mask	❍	❍	❍
		Gateway Address	❍	❍	❍
		Access Control	❍
		Access Mask	❍
		Network Boot	❍
		Valid Protocol *4	❍	❍	❍
		Ethernet Speed	❍	❍
File transfer settings		Delivery Server IP Address		✩
		*5
		Resend Interval Setting		❍
		Resend Frequency Setting		❍

*1

*2

*3

*4

*5

Settings for use as network TWAIN scanner Settings for use as network delivery scanner Settings for use as Document Server

Do not change this setting. It must be left at the factory default value. Make sure that IP address is set.

12