Lanier 5627 List Displays of Destinations and Senders, Update Address, Destination Display, Clear

5.Delivering Stored Scan Data by the Network Delivery Scanner

Stored scan data can be sent to a specified destination using the network deliv- ery scanner function. This chapter explains the various display screens, delivery procedures, and checking of the delivery result when this function is used.

Note

❒A delivery server in which ScanRouter V2 Lite/Professional is installed is necessary to use the network delivery server function. Information about de- livery destinations and senders must be programmed first into the delivery server. Also, program a connected device in [Set I/O Device] of ScanRouter V2 Administration Utility. For more information, see ScanRouter V2 Adminis- tration Utility Help.

List Displays of Destinations and Senders

The display configuration when using the machine as network delivery scanner is as follows:

1 2 3

4

5

6

1. [Update Address] 3. [Number Keys]

Press this key to obtain destination infor- mation from the delivery server and up- date the display. If the destination is changed in the delivery server, press the key to update the display.

2.Destination Display

The selected destination is shown here. If several destinations are selected, the se- lected destinations are displayed in order by pressing [UPrev.] or [TNext].

Note

❒Pressing the {Check Settings} key lets you verify the selected destinations.

Use these to specify a destination using the 3-digit short ID number.

4.[Attach Sender’s Name] [Attach Sub- ject]

Sets the sender and subject of the deliv- ered document.

5.[Clear]

Pressing this key clears a selection in the Destination List or a short ID number en- tered.

43