Lanier 5622, 5627 manual Message Possible Cause and Action

7

Appendix

Message	Possible Cause and Action
Exceeded max. number of pages (500 pages)	The maximum number of pages per file is 500.
per file.	Specify whether to use the data or not. Scan
Do you want to store the scanned pages as 1 file?	the page that could not read once more as a
	new file.
Exceeded max. number of stand-by files.	There are 50 standby files in the sending queue
Try again after the data transmission is com-	for the delivery server. Wait until files have
	been sent.
pleted.
Exceeded max. page capacity per file.	Because the number of scanned pages reaches
Only the scanned data will be transmitted.	the maximum value for delivery, only the data
	already scanned is transmitted. Retransmit the
Scan the remaining data after transmission.
	remaining pages.
Memory is full.	Because of insufficient hard disk capacity, the
Cannot scan.	first page could not be fully scanned. Try one
	of the following measures.
	• Wait for a while and retry the scan operation.
	• Reduce the scan area.
	• Delete unneeded stored files.
Memory is full.	There is not enough remaining hard disk ca-
Cannot scan. Stored files delivery is only avail-	pacity. No more files can be stored. Delete un-
able.	needed files.

Note
❒ These messages are shown alternately.
Memory is full.	There is not enough remaining hard disk ca-
Delete the unnecessary stored file.	pacity. Delete unneeded files.
Note
❒ These messages are shown alternately.
Memory is full.	Because there is not enough hard disk capacity
Press [Transmit] to transmit the scanned data.	in the machine, the page could only be partially
To delete the data, press [Cancel].	scanned. Specify whether to use the data or not.
Memory is full. Scanning has been cancelled.	Because there is not enough hard disk capacity
Do you want to store the scanned data?	in the machine, the page could only be partially
	scanned. Specify whether to use the data or not.
Memory is full. Scanning has been cancelled.	Because there is not enough hard disk capacity
Press [Transmit] to transmit the scanned data.	in the machine, the page could only be partially
To delete the data, press [Cancel].	scanned. Specify whether to use the data or not.
No destination is programmed for this	The short ID number that can be assigned to
number.	each destination is not programmed in the de-
	livery server. Assign a correct number to each
	destination.

68