Lanier 5622, 5627 Using as a Network Delivery Scanner, ⇒System Settings manual

Preparations for Use as a Network Scanner

Using as a Network Delivery Scanner

1	Connect the machine to the network with an Ethernet cable.
	⇒System Settings manual
Connect to Network

2

2

Make System Settings

3

Make Scanner

Settings

4

Install Delivery

Software

5

Set Destination and

Sender Information

6

Install Client Computer

Software

Check the network settings in System Settings, and change if re- quired.

⇒System Settings manual

Make settings for the network delivery scanner, such as the set- tings of the scanning feature and subject information.

⇒p.12 “Initial Scanner Setup”

Install the software required for using the network delivery scanner functions, such as ScanRouter V2 Lite on the delivery server. Then, make the required settings for server maintenance and delivery service.

⇒p.26 “Software for using a Network Delivery Scanner”

Reference

For information about ScanRouter V2 Lite, see the ScanRout- er V2 Lite manual. ⇒ p.i “Manuals for This Machine”

Use ScanRouter V2 Administration Utility to set the destination and sender information.

On the client computers, install the software required for view- ing or auto-receiving documents by connecting to the delivery server, such as DeskTopBinder V2 Lite.

⇒p.27 “DeskTopBinder V2 Lite”

10