Lanier 5622 Placing the Original on the Exposure Glass, Lift the exposure glass cover or the ADF

Setting Originals

Placing the Original on the Exposure Glass

Originals which do not fit into the ADF, such as sheets with glued-on parts, books, etc., can be placed di- rectly on the exposure glass for scan- ning.

Note

❒For information about the origi-

3	nals which can be placed on the ex-
	posure glass, see the Copy

Reference manual.

A Lift the exposure glass cover or the ADF.

Note

❒Raise the exposure glass cover or ADF fully (more than 30 de- grees). The opening/closing ac- tion triggers the automatic original size detection process.

B Place the original on the exposure glass with the side to be scanned facing down. Align the far left edge of the original with the mark.

There are two original orienta- tions. Either orientation can be used for placement.

A Place the original so that the top edge touches the rear of the exposure glass.

B Place the original so that the top edge touches the top left of the exposure glass.

When using the machine as a network TWAIN scanner, this orientation is standard setting in the TWAIN driver. Normal- ly, use this orientation for set- ting.

C Close the exposure glass cover or the ADF.

D Select the original orientation ac- cording to the setting orientation.

Reference

⇒p.37 “Original Orientation and Scan Area Setting”

34