Lanier 5622, 5627 manual When selecting a destination from the list, Select the destination

Delivering Stored Scan Data by the Network Delivery Scanner

B Select the desired resolution, original size, and other items to change the settings.

The way to make scan settings is the same way as programing scan settings. See p.14 “Setting Scanner Features”.

CPress [OK].

The scan settings are applied.

5	F Select the destination.
	You can select the destination from

the list of destinations or by speci- fying a short ID number.

When selecting a destination from the list

APress [Update Address] to update the list of destinations.

Note

❒If the destination informa- tion programmed in the de- livery server is updated, the list displayed on the control panel of the machine is not updated automatically. To display the latest informa- tion for operation, press the

[Update Address] on the con- trol panel before delivering scan data to update the dis- played information.

❒If the list is updated after the destination or sender is se- lected, any selections are can- celled. Update the list before selecting destination and sender.

❒If there is scan data in the memory of the machine that have not yet been delivered,

[Update Address] is not availa- ble.

B Press the title for the desired destination and select the des- tination.

If the desired destination is not OK, press [U] or [T] to display the destination.

Note

❒The destination titles are pro- grammed in the delivery server.

C Select the destination to which the scan data is to be sent.

The selected destination is high- lighted, and also appears in the destination field at the top of the screen. A line appears over the title of the category to which the destination belongs.

46