Cisco Systems 5.3.x manual Label Speakers, How to Label Unidentified or Guest Speakers in a Video

Chapter 5 Edit Video

Procedures

Label Speakers

When the Pulse feature set is enabled, the Pulse speaker identification engine attempts to identify the speaker in a video. It does this by comparing the voice print with those of previously identified speakers. If the Pulse engine cannot identify the speaker, it assigns the voiceprint a generic label, such as Speaker 1.

How to Label Unidentified or Guest Speakers in a Video

If ...	Then, Edit the Video and ...
A speaker is unidentified	• Use the Label Unidentified Speakers workflow to
	assign a speaker name.
	Note The speaker name must be from users that are
	already present within Cisco Show and Share.
	• If the speaker is not present in Show and Share, use
	the Label Guest Speakers workflow to create and
	assign a guest speaker name.
One speaker is labeled as multiple speakers	Use either the Label Unidentified Speakers or the Label
	Guest Speakers workflow to assign the same name to the
	multiple speakers. Play the video. The speaker names are
	merged during video playback.
Multiple speakers are labeled as one	Use the Label Guest Speakers workflow to assign a
speaker	speaker name in the First field and a second speaker name
	in the Last field.
	Note Add two e-mail addresses in the Email field,
	separated by a comma.

A speaker is labeled incorrectly and the	Use the Label Guest Speakers workflow to create a guest
correct name is unknown	speaker named Unknown speaker and assign this name to
	the speaker.
	Note Leave the e-mail address field empty.
Music is labeled as a speaker	Use the Label Guest Speakers workflow to create a guest
	speaker named Nonspeech and assign this name to the
	speaker.
	Note Leave the e-mail address field empty.

Guidelines and Limitations

•For appliances running Release 5.3 and earlier, you can only assign unidentified speaker names from the users that are already present within Cisco Show and Share.

For appliances running Release 5.3.7 and later, if you have a guest speaker from outside of your organization and that person does not have a Cisco Show and Share account, you can assign that person’s name as a guest speaker.

User Guide for Cisco Show and Share 5.3.x

5-11