Cisco Systems 5.3.x manual Add Transitions Between Segments

Chapter 5 Edit Video

Procedures

Add Transitions Between Segments

The option to add transitions between two parts of your video is not available if the Pulse feature set or mobile application access is enabled.

Procedure

Step 1 If your video does not have separate segments, move the play head to the place in your video where you want to add a transition and click Split the Video.

The two segments appear in the segment browser below the video. A transition placeholder appears between them.

Step 2 Click a transition placeholder in the segment browser to choose it.

Step 3 Open the Add Transitions drawer if it is closed.

Step 4 Mouseover any transition in the drawer to see its effect animated.

These are the transition effects.

Wipe right. Wipe left. Wipe up.	Wipe	Spin out,	Spin out.	Diagonal	Diagonal	Dilate.	Fade.	Sweep.
	down.	then in,		wipe left.	wipe right.
		then out.

Step 5 Click the Add button above a transition effect to use it.

Tip If you choose the wrong transition effect by mistake, you can drag it from the segment browser to the trash can. Then, simply choose another effect.

Step 6 Click Save.

User Guide for Cisco Show and Share 5.3.x

5-7