2.Preparations for Use as a Network Scanner

To use the machine as a network scanner, you must make settings required for use as a scanner, as well as basic settings for use in a network.

First, see the System Settings manual for details about how to make basic set- tings, and then make scanner settings.

Preparation Sequence

The preparation sequence is different depending on whether the machine is to be used as a network TWAIN scanner or network delivery scanner, or the Doc- ument Server is used.

Using as a Network TWAIN Scanner

1

Connect to Network

2

Make System Settings

3

Make Scanner

Settings

4

Install Software

Connect the machine to the network with an Ethernet cable. ⇒System Settings manual

Check the network settings in System Settings, and change if re- quired.

⇒System Settings manual

Make settings such as compression setting for the TWAIN scan- ner.

p.12 “Initial Scanner Setup”

On the client computers, install the software required for using the network TWAIN scanner functions, such as TWAIN driver and DeskTopBinder V2 Lite.

p.25 “Software for using a Network TWAIN Scanner”

9

Page 17
Image 17
Lanier 5627, 5622 manual Preparation Sequence, Using as a Network Twain Scanner