7

English
You can reinforce the bass sound to maintain rich, full bass at low
volume (you can use this effect only for playback):
To get the effect, press the AHB (Active Hyper Bass) PRO but-
ton.
The “BASS” indicator lights up on the display.
To cancel the effect, press the button again.
The “BASS” indicator goes out.
You can control the tone by changing the bass and treble.
The analog clock acts to display the bass and treble settings.
By pressing either the BASS or TREBLE button on the Remote
Control, you can visually see the current tone control settings.
Examples: Flat Fully boosted

BASS Control ———————————

You can adjust the bass level (low frequency range level) between
–6 and +6. (0: Flat)
■

1. Press the BASS button on the Remote Con-

trol.

■

2. Press the UP or DOWN button on the

Remote Control to adjust the bass level.

TREBLE Control ——————————

You can adjust the treble level (high frequency range level) between
–6 and +6. (0: Flat)
■

1. Press the TREBLE button on the Remote

Control.
■

2. Press the UP or DOWN button on the

Remote Control to adjust the treble level.

In the System is in Standby, the digital clock and analog clock ap-
pear on the display at the same time. Only the analog clock is dis-
played when a music source is selected. You can see the analog
clock at all times.
When the System is turned on, you can display the digital clock at any
time.
To display the digital clock, press the CLOCK button on the
Unit or DISPLAY button on the Remote Control.
To return to the previous mode, press the same button again.
Note: To let the clock work, you need to set the clock beforehand.
(See “Setting the Clock” on page 20.)

Boosting the Bass Sound

(Active Hyper Bass PRO)

Tone Control (BASS/TREBLE)

( ) ( )
( ) ( )
BASS
DOWN UP
TREBLE
DOWN UP

Displaying the Time

Second Hand
Minute Hand
Hour Hand

UX-V6V(U)-eng.fm Page 7 Thursday, August 5, 1999 2:59 PM