3

English
CAUTION: Make all connections before plugging the Unit into an AC power outlet.

Using the Supplied Wire Antenna

Rear Panel of the Unit

Using an FM 75-Ohm Antenna Wire (not Supplied) and SW (7-21.85 MHz) Antenna Wire (not Supplied)

If reception is poor, connect the outdoor antenna.
Rear Panel of the Unit
Rear Panel of the Unit
CAUTION: To avoid noise, keep antennas away from the System, the connecting cord and the AC power
cord.

Connecting the FM/SW Antenna

Connecting the AM/SW Antenna

L
OPTICAL
DIGITAL OUT
L
R
R
AM EXT
FM EXT
AM
LOOP
FM/SW
75Ω
Extend the supplied FM/SW
Wire Antenna horizontally.
Strip vinyl shield from cut line,
twist wire core.
FM/SW (7-21.85MHz) Wire Antenna
L
OPTICAL
DIGITAL OUT
L
R
R
20 mm 10 mm
AM EXT
FM EXT
AM
LOOP
FM/SW
75Ω
Outdoor FM antenna wire
Outdoor SW (7-21.85MHz) antenna wire
Note: Before attaching a 75 ohm coaxial lead (the kind with a
round wire going to an outdoor antenna) or an outdoor SW
antenna, disconnect the supplied FM/SW Wire Antenna.
L
OPTICAL
DIGITAL OUT
L
R
R
AM EXT
FM EXT
AM
LOOP
FM/SW
75Ω
Note: Even when connecting an outdoor AM an-
tenna, keep the indoor AM/SW loop con-
nected.
Turn the loop until you
have the best reception.
Attach the AM/SW Loop to
its base by snapping the
tabs on the loop into the
slot in the base.
AM/SW (2.3-6.995MHz) Loop Antenna
AM/SW (2.3-6.995MHz) antenna wire (not supplied) if reception is poor,
connect the outdoor antenna.

UX-V6V(U)-eng.fm Page 3 Thursday, August 5, 1999 2:59 PM