To connect the AM loop antenna

Make sure to connect the wire correctly.

1 Hold

3 Release

2 Insert

For better FM/AM reception

Outdoor FM antenna (not supplied)

To connect the speaker cords

Make sure the both speakers are connected correctly and firmly.

1 Unlock

3 Lock

2Insert

When connecting the speaker cords, match the polarity of the speaker terminals: The black cord to (-), the red cord to

(+).

English

Vynile-covered wire (not supplied)

Extend it horizontally.

 

￿￿￿￿￿￿￿

 

￿￿

 

￿￿￿￿

 

￿￿

 

￿￿￿

AM loop antenna

￿￿

Keep it connected.

￿￿￿￿￿

￿￿

 

￿

• DO NOT connect more than one speaker to each terminal.

•DO NOT allow the conductor of the speaker cords to be in touch with the metallic parts of the System.

•If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna wire or speaker cords by twisting the vinyl.

Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector (IEC or DIN45325).

•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception.

6