JVC UXG28 —Playback, 1 Turn on the power, 2 Select the source, 3 Adjust the volume, 4 Operate the target source as explained later, To turn off (standby) the System

Daily Operations—Playback

English

	1
Numeric
buttons
	DISPLAY/
	PROGRAM
4/1/	2
Á/¢
PRESET
TUNING/	STOP 7
GROUP

3

1

2	￿￿	￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿
		￿￿￿

3

￿￿￿￿￿ ￿￿

￿￿￿￿￿￿

4

1 Turn on the power.

The STANDBY lamp on the main unit turns off.

2 Select the source.

Playback automatically starts if the selected source is ready to start.

•If you press AUX, start playback source on the external component.

3 Adjust the volume.

4 Operate the target source as explained later.

To turn off (standby) the System

The STANDBY lamp on the main unit lights up.

• A small amount of power is always consumed even while on standby.

For private listening

Connect a pair of headphones to the PHONES jack on the main unit. The sound will no longer come out of the speakers. Be sure to turn down the volume before connecting or putting the headphones.

•Disconnecting the headphones will activate the speakers again.

DO NOT turn off (stand by) the System with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the System or start playback.

How to Select Numbers

￿	￿	￿	Examples:
			• Within 99 songs
￿	￿	￿	15: => 10 → 1 → 5
			• More than 100 songs in
￿	￿	￿	Current Group.
			15: => 10 → 0 → 1 → 5
￿	￿￿		150: => 10 → 1 → 5 → 0

8