JVC manual VC-P840Uand VF-HP840USystem Diagrams, Power applied to camera via battery mount

VC-P840U and VF-HP840U System Diagrams

Power applied to camera via battery mount

When power is applied to the camera via a battery mount, then the following additional components are required to mount and power the VF-HP840U:

•	SA-K840	–VF-HP840U mount kit
•	PowerTap 20 –	- to power the VF-HP840U from the camera mount’s D tap - available from Anton Bauer

http://www.antonbauer.com

Power Applied to camera via a 4 pin XLR

When power is applied to the camera’s 4 pin XLR input, the following additional components are required to mount and power the VF-HP840U:

•	SA-K840	– VF-HP840U mount kit
•	VC-Y250US	– Y power cable used to apply power to the VF-HP840U and the Camera simultaneously