PTZ Page
This page sets the movement speed for Auto Return and Preset Position.
This page can be used during access using AadminB or AoperatorB.
●First, set the frame size to 640 x 360 or 640 x 480 in the [Encode] page. (A Page 26) Click [Advanced Settings] and [PTZ].
A
B
Memo:
●Press the [OK] button to enable the new settings.
●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the change was made. If you press the [Cancel] button, other changed items will also be restored to the values before the change was made.
Note:
●You can use the Digital PTZ for frame sizes 640 x 360 and 640 x 480 only. (A Page 17)
A Auto Return |
| Restores automatically to the state being specified under [Mode] if the |
| |||
|
|
| manually operated camera is not operated for the time period specified by |
| ||
|
|
| [Return Time]. |
|
| |
|
|
|
|
| ||
| Mode |
| Sets an action taken after Auto Return. |
| ||
|
|
| Disable | : Disables the auto return. |
| |
|
|
| Home | : Returns to the home position. |
| |
|
|
| Auto Patrol | : Restores the auto patrol action. |
| |
|
|
| [Set values: Disable, Home, Auto Patrol] |
| ||
|
|
|
|
| ||
| Return Time |
| Sets a time before restoring the action by Auto Return. |
| ||
|
|
| [Set values: 1, 2, 3, 5, 10, 20, 30, 60] min |
| ||
|
|
|
|
| ||
| Test |
| Click [Execute] to test the Auto Return action. |
| ||
|
|
|
|
| ||
B Preset Position |
| Specifies the speed to move to the preset position. |
| |||
| Speed |
| Memo: |
|
|
|
|
|
| ||||
|
|
| ● The speed to move the preset position of Auto Patrol is not specified in this |
| ||
|
|
| setting as the setting of the speed to move the Auto Patrol page is applied. |
| ||
|
|
|
|
| ||
|
|
|
|
| ||
| Speed |
| [Set values: Moment, Low, Mid, High] |
| ||
|
|
|
|
|
|
|
* The [Set values] in bold letters are factory defaults.
49